Skip to content

#combination

Keywords by Co - Occurrence

  1. Akgümüş Fatih, Şahin Hatice, İsafça Kaya Tuğçe, Mardani Ali (2025-12)
    Combined Effect of Recycled Tire Steel Fiber and Blast Furnace Slag on the Mechanical Performance of 3D Printable Concrete
  2. Oh Sangwoo, Lee Jinsuk, Oh Gyujong, Choi Seongcheol (2025-11)
    Effects of the Combined Incorporation of Superabsorbent Polymers and Polyvinyl Alcohol Fibers on Material Properties of 3D Printable Mortar:
    Rheology, Shrinkage, and Mechanical Behavior
  3. İlerisoy Zeynep, Takva Çağatay, Top Semahat, Gökgöz Berru et al. (2025-08)
    The Effectiveness of 3D Concrete Printing Technology in Architectural Design:
    Different Corner-Wall Combinations in 3D Printed Elements and Geometric Form Configurations in Residential Buildings
  4. Suphunsaeng Kantawich, Prasittisopin Lapyote, Pethrung Sirichai, Pansuk Withit (2025-03)
    Fire Performance Evaluation of 3D-Printed Concrete Walls:
    A Combined Full-Scale and Numerical Modeling Approach
  5. Shazad Qamar, Li Fangyuan (2025-01)
    Interfacial Bond-Effects on Shear-Strength and Damage in 3D Printed Concrete Structures:
    A Combined Experimental and Numerical Study
  6. Dulaj Albanela, Peeters Sef, Poorsolhjouy Payam, Salet Theo et al. (2024-09)
    Combined Analytical and Numerical Modelling of the Electrical Conductivity of 3D Printed Carbon-Nano-Tube-Cementitious-Nano-Composites
  7. Tasaki Haruto, Asakawa Tomoya, Kobayashi Noriyuki, Nishiwaki Tomoya et al. (2024-09)
    A Direction-Independent Reinforcement by Combination of Fiber-Reinforced Cementitious Composite and Automated Pin Insertion
  8. Gou Hongxiang, Sofi Massoud, Zhang Zipeng, Zhu Mintao et al. (2024-03)
    Combined Printable and Mechanical Analysis of 3D Printed Green High-Strength, Lightweight Engineered Cementitious Composites
  9. Hass Lauri, Nefs Karsten, Bos Freek, Salet Theo (2023-10)
    Application Potential of Combining Strain-Hardening Cementitious Composites and Helical Reinforcement for 3D Concrete Printed Structures:
    Case Study of a Spiral Staircase
  10. Chen Yuning, Xia Kailun, Jia Zijian, Gao Yueyi et al. (2023-10)
    Extending Applicability of 3D Printable Geopolymer to Large-Scale Printing Scenario via Combination of Sodium Carbonate and Nano-Silica
  11. Jacquet Yohan, Perrot Arnaud (2023-07)
    Sewing Concrete Device:
    Combining In-Line Rheology-Control and Reinforcement-System for 3D Concrete Printing
  12. Sobek Werner, Schmeer Daniel (2023-05)
    Graded Concrete (2. Generation):
    The Combination of Hollow-Core Construction with Trajectory-Based Reinforcement
  13. Miranda Luiza, Marchesini Flávio, Lesage Karel, Schutter Geert (2022-12)
    The Evolution of the Rheological Behavior of Hydrating Cement Systems:
    Combining Constitutive Modeling with Rheometry, Calorimetry and Mechanical Analyses
  14. Dörrie Robin, Laghi Vittoria, Arrè Lidiana, Kienbaum Gabriela et al. (2022-10)
    Combined Additive Manufacturing Techniques for Adaptive Coastline Protection Structures
  15. Xiao Yinan, Khader Noor, Vandenberg Aileen, Lowke Dirk et al. (2022-06)
    Injection 3D Concrete Printing (I3DCP) Combined with Vector-Based 3D Graphic Statics
  16. Xiao Jianzhuang, Lv Zhenyuan, Duan Zhenhua, Hou Shaodan (2022-03)
    Study on Preparation and Mechanical Properties of 3D Printed Concrete with Different Aggregate-Combinations
  17. Chen Yuning, Jia Lutao, Liu Chao, Zhang Zedi et al. (2022-01)
    Mechanical Anisotropy Evolution of 3D Printed Alkali-Activated Materials with Different GGBFS-FA Combinations
  18. Lesovik Valeriy, Fediuk Roman, Amran Mugahed, Alaskhanov Arbi et al. (2021-12)
    3D Printed Mortars with Combined Steel and Polypropylene Fibers
  19. Rennen Philipp, Khader Noor, Hack Norman, Kloft Harald (2021-11)
    A Hybrid Additive Manufacturing Approach:
    Combining Additive Manufacturing and Green-State Concrete Milling to Create a Functionally Integrated Loadbearing Concrete Panel System
  20. Straßer Alexander, Weger Daniel, Matthäus Carla, Kränkel Thomas et al. (2021-11)
    Combining Wire and Arc Additive Manufacturing and Selective Paste-Intrusion for Additively Manufactured Structural Concrete
  21. Matthäus Carla, Kofler Nadine, Kränkel Thomas, Weger Daniel et al. (2020-10)
    Inter-Layer Reinforcement Combined with Fiber-Reinforcement for Extruded Lightweight Mortar Elements
  22. Pastore Tommaso, Menna Costantino, Asprone Domenico (2020-07)
    Combining Multiple Loads in a Topology-Optimization Framework for Digitally Fabricated Concrete Structures
  23. Weger Daniel, Baier Daniel, Straßer Alexander, Prottung Sophia et al. (2020-07)
    Reinforced Particle-Bed Printing by Combination of the Selective Paste-Intrusion Method with Wire and Arc Additive Manufacturing:
    A First Feasibility Study
  24. Tan Kang (2018-09)
    The Framework of Combining Artificial Intelligence and Construction 3D Printing in Civil Engineering
  25. Secrieru Egor, Fataei Shirin, Schröfl Christof, Mechtcherine Viktor (2017-04)
    Study on Concrete Pumpability Combining Different Laboratory Tools and Linkage to Rheology
  26. Perrot Arnaud, Mélinge Yannick, Rangeard Damien, Micaelli Francesca et al. (2012-06)
    Use of Ram Extruder as a Combined Rheo-Tribometer to Study the Behavior of High-Yield-Stress Fluids at Low Strain-Rate