Modification of Properties of Fresh Mixture for 3D Printing Using Cement-Based Mortar (2025-07)¶
Kellnerová Vendula, David Tomáš,
Journal Article - Acta Polytechnica, Vol. 53, pp. 33-36
Abstract
Portland cement is traditional binding material which is applicable for various modern technologies in these days – the 3D printing is one of them. The development of 3D printers using cement-based materials for the manufacturing of structural elements and moreover entire building is novel concept of structural engineering, which combines advanced material solution and high level of automation. This paper is focused on the study of properties of fresh mixture in order to control its consistency and regime of setting time to achieve continual process of 3D printing. The properties of fresh mortar were modified by the admixture accelerating the process of hardening and stabilizing agent. The performed experimental program showed that both applied admixtures could be used for the control of the consistency of fresh mortar to achieve optimal shape of mortar layer after its extrusion.
¶
9 References
- Li Mingyang, Weng Yiwei, Liu Zhixin, Zhang Dong et al. (2022-09)
Optimizing of Chemical Admixtures for 3D Printable Cementitious Materials by Central Composite Design - Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-01)
The Effect of Accelerator Dosage on Fresh Concrete Properties and on Inter-Layer Strength in Shotcrete 3D Printing - Marchon Delphine, Kawashima Shiho, Bessaies-Bey Hela, Mantellato Sara et al. (2018-05)
Hydration- and Rheology-Control of Concrete for Digital Fabrication:
Potential Admixtures and Cement-Chemistry - Ramakrishnan Sayanthan, Kanagasuntharam Sasitharan, Sanjayan Jay (2022-05)
In-Line Activation of Cementitious Materials for 3D Concrete Printing - Rehman Atta, Melesse Birru, Kim Jung-Hoon (2023-02)
Set-on-Demand 3D Concrete Printing Construction and Potential Outcome of Shotcrete-Accelerators on Its Hardened Properties - Wangler Timothy, Pileggi Rafael, Gürel Şeyma, Flatt Robert (2022-03)
A Chemical Process Engineering Look at Digital Concrete Processes:
Critical Step Design, In-Line Mixing, and Scale-Up - Weng Yiwei, Lu Bing, Li Mingyang, Liu Zhixin et al. (2018-09)
Empirical Models to Predict Rheological Properties of Fiber-Reinforced Cementitious Composites for 3D Printing - Zhang Chao, Nerella Venkatesh, Krishna Anurag, Wang Shen et al. (2021-06)
Mix-Design Concepts for 3D Printable Concrete:
A Review - Zhang Yu, Zhang Yunsheng, Liu Guojian, Yang Yonggan et al. (2018-04)
Fresh Properties of a Novel 3D Printing Concrete Ink
0 Citations
BibTeX
@article{kell_davi_reit.2025.MoPoFMf3PUCBM,
author = "Vendula Kellnerová and Tomáš David and Pavel Reiterman",
title = "Modification of Properties of Fresh Mixture for 3D Printing Using Cement-Based Mortar",
doi = "10.14311/app.2025.53.0033",
year = "2025",
journal = "Acta Polytechnica",
volume = "53",
pages = "33--36",
}
Formatted Citation
V. Kellnerová, T. David and P. Reiterman, “Modification of Properties of Fresh Mixture for 3D Printing Using Cement-Based Mortar”, Acta Polytechnica, vol. 53, pp. 33–36, 2025, doi: 10.14311/app.2025.53.0033.
Kellnerová, Vendula, Tomáš David, and Pavel Reiterman. “Modification of Properties of Fresh Mixture for 3D Printing Using Cement-Based Mortar”. Acta Polytechnica 53 (2025): 33–36. https://doi.org/10.14311/app.2025.53.0033.