Applicability of Existing Models for the Strength Development of 3D Printed Thixotropic Concretes During Hardening (2021-12)¶
, ,
Journal Article - Mechanics of Advanced Materials and Structures, Vol. None, Iss. None, pp. 1-10
Abstract
The special properties of 3 D-Printed Concrete in terms of rheology, deposition technology, and dosage substantially modify its mechanical properties after hardening. In this paper, comparisons are drawn between different concrete strength development models specified in the main Building-Codes and Standards and experimental data from tests on various thixotropic mortar mixes suitable for 3DPC. The aim was to develop an empirical procedure to improve the current models, so that their results could predict the properties of the 3DPC bulk materials more closely. An updated set of parameters for the models was obtained via curve-fitting of the models to the experimental data.
¶
30 References
- Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
Additive Manufacturing of Concrete in Construction:
Potentials and Challenges of 3D Concrete Printing - Buchli Jonas, Giftthaler Markus, Kumar Nitish, Lussi Manuel et al. (2018-07)
Digital In-Situ Fabrication:
Challenges and Opportunities for Robotic In-Situ Fabrication in Architecture, Construction, and Beyond - Buswell Richard, Soar Rupert, Gibb Alistar, Thorpe Tony (2006-06)
Freeform Construction:
Mega-Scale Rapid Manufacturing for Construction - Buswell Richard, Thorpe Tony, Soar Rupert, Gibb Alistar (2008-05)
Design, Data and Process Issues for Mega-Scale Rapid Manufacturing Machines Used for Construction - Cesaretti Giovanni, Dini Enrico, Kestelier Xavier, Colla Valentina et al. (2013-08)
Building Components for an Outpost on the Lunar Soil by Means of a Novel 3D Printing Technology - Ding Tao, Xiao Jianzhuang, Zou Shuai, Zhou Xinji (2020-08)
Anisotropic Behavior in Bending of 3D Printed Concrete Reinforced with Fibers - Duballet Romain, Baverel Olivier, Dirrenberger Justin (2017-08)
Classification of Building Systems for Concrete 3D Printing - Geng Zifan, She Wei, Zuo Wenqiang, Lyu Kai et al. (2020-09)
Layer-Interface Properties in 3D Printed Concrete:
Dual Hierarchical Structure and Micromechanical Characterization - Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
Large-Scale 3D Printing of Ultra-High-Performance Concrete:
A New Processing Route for Architects and Builders - Khoshnevis Behrokh (2003-11)
Automated Construction by Contour Crafting:
Related Robotics and Information Technologies - Khoshnevis Behrokh, Hwang Dooil, Yao Ke, Yeh Zhenghao (2006-05)
Mega-Scale Fabrication by Contour Crafting - Kloft Harald, Krauss Hans-Werner, Hack Norman, Herrmann Eric et al. (2020-05)
Influence of Process Parameters on the Inter-Layer Bond Strength of Concrete Elements Additive Manufactured by Shotcrete 3D Printing - Labonnote Nathalie, Rønnquist Anders, Manum Bendik, Rüther Petra (2016-09)
Additive Construction:
State of the Art, Challenges and Opportunities - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Hardened Properties of High-Performance Printing Concrete - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Mix-Design and Fresh Properties for High-Performance Printing Concrete - Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
Developments in Construction-Scale Additive Manufacturing Processes - Lim Sungwoo, Buswell Richard, Le Thanh, Wackrow Rene et al. (2011-07)
Development of a Viable Concrete Printing Process - Mechtcherine Viktor, Nerella Venkatesh, Will Frank, Näther Mathias et al. (2019-08)
Large-Scale Digital Concrete Construction:
CONPrint3D Concept for On-Site, Monolithic 3D Printing - Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing - Panda Biranchi, Tay Yi, Paul Suvash, Tan Ming (2018-05)
Current Challenges and Future Potential of 3D Concrete Printing - Pegna Joseph (1997-02)
Exploratory Investigation of Solid Freeform Construction - Salet Theo, Ahmed Zeeshan, Bos Freek, Laagland Hans (2018-05)
Design of a 3D Printed Concrete Bridge by Testing - Salet Theo, Bos Freek, Wolfs Robert, Ahmed Zeeshan (2017-06)
3D Concrete Printing:
A Structural Engineering Perspective - Schutter Geert, Lesage Karel, Mechtcherine Viktor, Nerella Venkatesh et al. (2018-08)
Vision of 3D Printing with Concrete:
Technical, Economic and Environmental Potentials - Wangler Timothy, Lloret-Fritschi Ena, Reiter Lex, Hack Norman et al. (2016-10)
Digital Concrete:
Opportunities and Challenges - Wangler Timothy, Roussel Nicolas, Bos Freek, Salet Theo et al. (2019-06)
Digital Concrete:
A Review - Wolfs Robert, Bos Freek, Salet Theo (2019-03)
Hardened Properties of 3D Printed Concrete:
The Influence of Process Parameters on Inter-Layer Adhesion - Yu Kequan, McGee Wesley, Ng Tsz, Zhu He et al. (2021-02)
3D Printable Engineered Cementitious Composites:
Fresh and Hardened Properties - Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Pereira Eduardo et al. (2021-03)
Influence of the Printing-Direction and Age on the Mechanical Properties of 3D Printed Concrete - Zareiyan Babak, Khoshnevis Behrokh (2017-06)
Inter-Layer Adhesion and Strength of Structures in Contour Crafting:
Effects of Aggregate-Size, Extrusion-Rate, and Layer-Thickness
BibTeX
@article{cast_cald_marc.2021.AoEMftSDo3PTCDH,
author = "Ruben Castano-Alvarez and Iñigo Calderon-Uriszar-Aldaca and Ignacio Marcos",
title = "Applicability of Existing Models for the Strength Development of 3D Printed Thixotropic Concretes During Hardening",
doi = "10.1080/15376494.2021.2018072",
year = "2021",
journal = "Mechanics of Advanced Materials and Structures",
volume = "None",
number = "None",
pages = "1--10",
}
Formatted Citation
R. Castano-Alvarez, I. Calderon-Uriszar-Aldaca and I. Marcos, “Applicability of Existing Models for the Strength Development of 3D Printed Thixotropic Concretes During Hardening”, Mechanics of Advanced Materials and Structures, vol. None, no. None, pp. 1–10, 2021, doi: 10.1080/15376494.2021.2018072.
Castano-Alvarez, Ruben, Iñigo Calderon-Uriszar-Aldaca, and Ignacio Marcos. “Applicability of Existing Models for the Strength Development of 3D Printed Thixotropic Concretes During Hardening”. Mechanics of Advanced Materials and Structures None, no. None (2021): 1–10. https://doi.org/10.1080/15376494.2021.2018072.