3D Concrete Printing Technology (2022-11)¶
,
Contribution - Smart Technologies in Urban Engineering, pp. 537-546
Abstract
This paper describes the development tasks of localized for Ukraine 3D concrete printing technology, the ways of design, manufacture and testing in industrial conditions a technological equipment set as a part of Smart Manufacturing conception in construction. It is necessary to create design documentation, technological regulations, guidelines and special software for technology implementation. As the same the object of novelty should be the technology of manufacturing special concrete mixtures localized for raw materials available in Ukraine. According to the project objectives, it justified the use BIM technologies, which corresponds to the target program of the Ministry of Regional Development of Ukraine. The work results should be the solution for the mass construction of affordable durable middle-class housing for the housing stock in Ukraine restoration.
¶
14 References
- Asprone Domenico, Menna Costantino, Bos Freek, Mata-Falcón Jaime et al. (2022-01)
Structural Design and Testing of Digitally Manufactured Concrete Structures - Cao Xiangpeng, Yu Shiheng, Cui Hongzhi, Li Zongjin (2022-04)
3D Printing Devices and Reinforcing Techniques for Extruded Cement-Based Materials:
A Review - Chen Yu, He Shan, Gan Yidong, Çopuroğlu Oğuzhan et al. (2021-11)
A Review of Printing-Strategies, Sustainable Cementitious Materials and Characterization Methods in the Context of Extrusion-Based 3D Concrete Printing - Cui Hongzhi, Li Yuanhong, Cao Xiangpeng, Huang Mingyang et al. (2022-03)
Experimental Study of 3D Concrete Printing-Configurations Based on the Buildability Evaluation - Gradeci Klodian, Labonnote Nathalie (2019-11)
On the Potential of Integrating Building Information Modelling for the Additive Manufacturing of Concrete Structures - Guamán-Rivera Robert, Martínez-Rocamora Alejandro, García-Alvarado Rodrigo, Muñoz-Sanguinetti Claudia et al. (2022-02)
Recent Developments and Challenges of 3D Printed Construction:
A Review of Research Fronts - Jipa Mihail-Andrei, Dillenburger Benjamin (2022-04)
3D Printed Formwork for Concrete:
State of the Art, Opportunities, Challenges, and Applications - Kajzr Daniel, Břoušek Josef, Petr Tomas, Beran Leoš et al. (2021-12)
New Design of PLC-Based Robotic Control System for Concrete Printing in Building Construction - Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2021-06)
Technologies for Improving Buildability in 3D Concrete Printing - Roussel Nicolas (2018-05)
Rheological Requirements for Printable Concretes - Şahin Hatice, Mardani Ali (2021-12)
Assessment of Materials, Design Parameters and Some Properties of 3D Printing Concrete Mixtures:
A State of the Art Review - Schuldt Steven, Jagoda Jeneé, Hoisington Andrew, Delorit Justin (2021-03)
A Systematic Review and Analysis of the Viability of 3D Printed Construction in Remote Environments - Sharma Shivam, Mitra Soham, Adesina Adeyemi, Das Sreekanta (2020-09)
Construction Industry with 3D Printer:
A New Era - Wolfs Robert, Bos Freek, Strien Emiel, Salet Theo (2017-06)
A Real-Time Height Measurement and Feedback System for 3D Concrete Printing
BibTeX
@inproceedings{kula_kabu.2023.3CPT,
author = "Oleh Kulaienko and Oleksii Kabus",
title = "3D Concrete Printing Technology: Implementing Tasks in Ukraine",
doi = "10.1007/978-3-031-20141-7_49",
year = "2023",
volume = "536",
pages = "537--546",
booktitle = "Smart Technologies in Urban Engineering",
editor = "Olga Arsenyeva and Tatiana Romanova and Maria Sukhonos and Yevgen Tsegelnyk",
}
Formatted Citation
O. Kulaienko and O. Kabus, “3D Concrete Printing Technology: Implementing Tasks in Ukraine”, in Smart Technologies in Urban Engineering, 2023, vol. 536, pp. 537–546. doi: 10.1007/978-3-031-20141-7_49.
Kulaienko, Oleh, and Oleksii Kabus. “3D Concrete Printing Technology: Implementing Tasks in Ukraine”. In Smart Technologies in Urban Engineering, edited by Olga Arsenyeva, Tatiana Romanova, Maria Sukhonos, and Yevgen Tsegelnyk, 536:537–46, 2023. https://doi.org/10.1007/978-3-031-20141-7_49.