Skip to content

#specimen

Keywords by Co - Occurrence

  1. Xu Shuhao, Lin Xing-Tao, Chen Xiangsheng (2025-11)
    Numerical Investigation of Anisotropic in 3D Printed Concrete Specimens Considering the Effects of Weak Interfaces and Pore-Induced Defects
  2. Lin Xing-Tao, Xu Shuhao, Chen Xiangsheng, Huang Zhongkai (2025-06)
    3D Printed Concrete Tunnel Lining:
    Comparative Study on Mechanical Properties of Curved and Straight Printed Specimens
  3. An Ning, Wang Huai, Wang Peijun, Xu Chuanhua et al. (2025-04)
    Tension-Compression Anisotropic Cohesion Model for the Interlayer Interface of 3D-Printed Concrete Compression Specimens
  4. Kompella Sriram, Levi Marinella, Ferrara Liberato (2025-04)
    Identifying Interlayer Fracture Properties in 3D Printed Concrete Specimens via Multidirectional Flexural Tests
  5. Wang Xianggang, Dong Enlai, Jia Zijian, Jia Lutao et al. (2024-09)
    Specimen-Size-Effect on Compressive Strength of 3D Printed Concrete Containing Coarse Aggregate with Varying Water-to-Binder-Ratios
  6. Kobayashi Noriyuki, Asakawa Tomoya, Nishiwaki Tomoya, Egawa Ryo et al. (2024-09)
    An Automated Pin Insertion Method for 3DCP and Its Reinforcement Effects on Beam Specimens
  7. Brunner Kim, Tandon Kai, Stengel Thorsten (2024-09)
    Hydration Characteristics of 3D Particle-Bed Printed Cementitious Specimens
  8. Radl Elisabeth, Pfleger Marc-Patrick, Karolyi Juliian, Vill Markus (2024-04)
    Specimen Design and Advanced Material-Testing for 3D Printing Concretes
  9. Sun Chang, Zhao Haiye, Liu Qiong, Pan Feng (2024-04)
    Shear Behavior of 3DPM-NM Specimens with Different Interfacial Locking Designs
  10. Ma Lei, Jia Zijian, Chen Yuning, Jiang Yifan et al. (2024-03)
    Water Loss and Shrinkage Prediction in 3D Printed Concrete with Varying w/b and Specimen Sizes
  11. Surehali Sahil, Tripathi Avinaya, Neithalath Narayanan (2023-08)
    Anisotropy in Additively Manufactured Concrete Specimens Under Compressive Loading:
    Quantification of the Effects of Layer-Height and Fiber-Reinforcement
  12. Yang Weiyi, Huang Zili, Verma Rupesh, Nguyen Giang et al. (2023-01)
    Effect of Layer-Orientation on Behavior of 3D Printed Rock Specimens in Indirect Tensile Testing
  13. Sikora Paweł, Techman Mateusz, Federowicz Karol, Khayatt Ahmed et al. (2022-07)
    Insight into the Microstructural and Durability Characteristics of 3D Printed Concrete:
    Cast versus Printed Specimens
  14. Stidwell Samuel, Kreiger Eric (2021-12)
    Determination of Mechanical Properties of Additively Constructed Concrete Based on Specimen-Orientation
  15. Shakor Pshtiwan, Gowripalan Nadarajah, Rasouli Habib (2021-03)
    Experimental and Numerical Analysis of 3D Printed Cement Mortar Specimens Using Inkjet 3DP
  16. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2020-07)
    Shape Accuracy Evaluation of Geopolymer Specimens Made Using Particle-Bed 3D Printing