Skip to content

#phase

Keywords by Co - Occurrence

  1. Gencel Osman, Er Yusuf, Güler Onur, Ustaoğlu Abid et al. (2026-01)
    Replacing Natural Aggregates with Phase Change Material-Based 3D Printed Aggregates in Concrete for Structural Function and Dual Thermal Energy Storage
  2. Zhang Yi, Ren Qiang, Tittelboom Kim, Schutter Geert et al. (2025-09)
    Layer Interface in 3D Printed Cement-Based Materials:
    Heterogeneous Phase Distribution and New Insights into Formation Mechanism
  3. Gencel Osman, Nodehi Mehrab, Subaşı Serkan, Ustaoğlu Abid et al. (2025-09)
    Properties of 3D Printed Concrete Containing Microencapsulated Phase Change Material
  4. Rousan Rajai, Alnemrawi Bara'a, Abdalla Khairedin, Awawdeh Najemaldeen et al. (2025-06)
    Mitigation of Energy Crisis Worldwide Using 3D-Printed Concrete with Phase Change Materials
  5. Divya M., Riza S., Shariff Najeeb (2025-06)
    Characterization of Cold Joint Formation in Digitally Printed Mortar During the Dormant Phase:
    A Time-Dependent Study
  6. Qiao Zhigang, Li Hui, Wang Fei, Qi Yongle et al. (2025-04)
    Optimizing Thermal Energy Storage in 3D Printed Concrete with Hollow Ceramsite Composite Phase Change Materials
  7. Omur Tarik, Akpunar Ahmet, Bingöl Ayşe, Oktay Büşra et al. (2025-01)
    The Influence of Phase-Change-Material Filled Three-Dimensional Printed Artificial Aggregates on the Properties of Blast-Furnace-Slag Based Alkali-Activated Concrete
  8. Sun Yubo, Zhang Xinyue, Zhou Jiangang, Wang Yilin et al. (2024-11)
    Extrudability-Analysis of 3D Printable Concrete as a Two-Phase Discrete Flow
  9. Rahemipoor Sahand, Bayat Mohammad, Hasany Masoud, Mehrali Mohammad et al. (2024-10)
    Micro-Encapsulated Phase-Change-Material in 3D Printable Mortars
  10. Márquez Álvaro, Ramallo Laura, Varela Hugo, Barluenga Gonzalo et al. (2024-09)
    3D Printing Architectural Applications of Cement-Lime Mortars with Microencapsulated Phase-Change-Material
  11. Gao Huaxing, Chen Yuxuan, Chen Qian, Yu Qingliang (2023-11)
    Thermal and Mechanical Performance of 3D Printing Functionally Graded Concrete:
    The Role of SAC on the Rheology and Phase Evolution of 3DPC
  12. Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-09)
    Effects of 3D Concrete Printing Phases on the Mechanical Performance of Printable Strain-Hardening Cementitious Composites
  13. Christen Heidi, Zijl Gideon, Villiers Wibke, Moelich Migael (2023-09)
    Validated Simulation of Thermal Performance of Phase-Change-Material-Infused Recycled Brick-Aggregate in 3D Printed Concrete
  14. Rahemipoor Sahand, Hasany Masoud, Mehrali Mohammad, Almdal Kristoffer et al. (2023-07)
    Phase-Change-Materials Incorporation into 3D Printed Geopolymer Cement:
    A Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings
  15. Christen Heidi, Zijl Gideon, Villiers Wibke (2023-02)
    Improving Building Thermal Comfort Through Passive Design:
    An Experimental Analysis of Phase-Change-Material 3D Printed Concrete
  16. Jiang Jinyang, Zheng Chaolang, Wang Fengjuan, Xu Wenxiang et al. (2022-11)
    Novel 3D Printing Phase-Change-Aggregate-Concrete:
    Mechanical and Thermal Properties Analysis
  17. Christen Heidi, Cho Seung, Zijl Gideon, Villiers Wibke (2022-11)
    Phase-Change-Material-Infused Recycled Brick-Aggregate in 3D Printed Concrete
  18. Hao Lucen, Xiao Jianzhuang, Sun Jingting, Xia Bing et al. (2022-06)
    Thermal Conductivity of 3D Printed Concrete With Recycled Fine Aggregate Composite Phase-Change-Materials
  19. Zhang Chao, Jia Zijian, Wang Xianggang, Jia Lutao et al. (2022-05)
    A Two-Phase Design-Strategy Based on the Composite of Mortar and Coarse Aggregate for 3D Printable Concrete with Coarse Aggregate
  20. Cui Hongzhi, Yu Shiheng, Cao Xiangpeng, Yang Haibin (2022-03)
    Evaluation of Printability and Thermal Properties of 3D Printed Concrete Mixed with Phase-Change-Materials
  21. Wu Zixia, Xu Yading, Šavija Branko (2021-12)
    Mechanical Properties of Lightweight Cementitious Cellular Composites Incorporating Micro-Encapsulated Phase-Change-Material
  22. Shahzad Qamar, Shen Junyi, Naseem Rabia, Yao Yonggang et al. (2021-10)
    Influence of Phase-Change-Material on Concrete Behavior for Construction 3D Printing
  23. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-11)
    Additive Manufacturing of Cementitious Materials by Selective Paste-Intrusion:
    Numerical Modeling of the Flow Using a 2D-Axisymmetric Phase-Field-Method
  24. Rahul Attupurathu, Sharma Abhishek, Santhanam Manu (2020-01)
    A Desorptivity-Based Approach for the Assessment of Phase Separation During Extrusion of Cementitious Materials