Skip to content

#brick

Keywords by Co - Occurrence

  1. Aabbas Mohamed, Mazian Brahim, Ahachad Mohammed, Zoghlami Aya et al. (2025-12)
    Sustainable 3D Printed Clay Bricks Incorporating Coffee Waste:
    Toward Circular Economy in Construction
  2. Ma Jinyi, Zhang Haiyan, Wang Yanzhi, Xiong Lu et al. (2025-07)
    Effect of Clay Brick Powder and Recycled Fine Aggregates on Properties of 3D Printed Concrete After High Temperature Exposure
  3. Saad E., Correa David (2025-06)
    Thermal Performance Improvement of Brick Design via 3D Printing
  4. Radl Elisabeth, Pfleger Marc-Patrick, Sieh Alexander, Vill Markus (2025-06)
    Conceptual Design and Production of a 3D Printed Concrete Base Brick with Evaluation of Its Thermal Properties
  5. Jia Lutao, Dong Enlai, Xia Kailun, Niu Geng et al. (2025-04)
    Initial Plastic Shrinkage of 3D-Printed Concrete Incorporating Recycled Brick Fine Aggregates:
    Insights from Water Transport and Structural Evolution
  6. Tarek Shaimaa, Mansour Yasser, Abdelmohsen Sherif, Kohail Mohamed et al. (2025-02)
    Evaluating the Role of Additive Manufacturing in Adobe Brick Enhancement:
    A Comparative Study
  7. Pepe Marco, Lombardi Rosario, Lima Carmine, Paolillo Bruno et al. (2025-01)
    Experimental Evidence on the Possible Use of Fine Concrete and Brick Recycled Aggregates for 3D Printed Cement-Based Mixtures
  8. Kul Anil, Kocaer Öznur, Aldemir Alper, Yıldırım Gürkan et al. (2024-12)
    3D Printable One-Part Alkali-Activated Mortar Derived from Brick-Masonry-Wastes
  9. Huang Bo, Ge Yutian, Wang Xiangyu, Wang Yufei et al. (2024-11)
    Recycled Ceramic-Brick-Powder Utilization in Fiber-Reinforced 3D Printing Concrete:
    An Eco-Friendly Substitute to Conventional Fine Aggregates
  10. Chougan Mehdi, Skibicki Szymon, Noaimat Yazeed, Federowicz Karol et al. (2024-09)
    Comparative Analysis of Ternary Blended Cement with Clay and Engineering-Brick-Aggregate for High-Performance 3D Printing
  11. Jia Lutao, Niu Geng, Dong Enlai, Jiang Yifan et al. (2024-08)
    Optimization-Strategy for Incorporating Recycled Brick-Powder in 3D Printed Concrete by Balancing Low-Carbon Footprint and Enhanced Performance
  12. Jia Lutao, Jia Zijian, Zhang Zedi, Tang Zhenzhong et al. (2024-02)
    Effect of Recycled Brick-Powder with Various Particle-Features on Early-Age Hydration, Water-State, and Rheological Properties of Blended Cement-Paste in the Context of 3D Printing
  13. Noaimat Yazeed, Chougan Mehdi, Albar Abdulrahman, Skibicki Szymon et al. (2023-10)
    Recycled Brick-Aggregates in One-Part Alkali-Activated Materials:
    Impact on 3D Printing Performance and Material-Properties
  14. Christen Heidi, Zijl Gideon, Villiers Wibke, Moelich Migael (2023-09)
    Validated Simulation of Thermal Performance of Phase-Change-Material-Infused Recycled Brick-Aggregate in 3D Printed Concrete
  15. Ospina Salazar Ana, Valencia Isaza Andrés, Restrepo Montoya José, Mejía Arcila Johanna et al. (2023-09)
    Upcycling Fly-Ash, Red-Clay-Brick Waste, and Paper-Sludge as Feedstock for Manufacturing a Lightweight Extruded Composite:
    Design and Characterization
  16. Robayo-Salazar Rafael, Martínez Fabio, Vargas Armando, Gutiérrez Ruby (2023-06)
    3D Printing of Hybrid Cements Based on High Contents of Powders from Concrete, Ceramic and Brick Waste Chemically Activated with Sodium Sulphate (Na2SO4)
  17. Zhao Yasong, Gao Yangyunzhi, Chen Gaofeng, Li Shujun et al. (2023-04)
    Development of Low-Carbon Materials from GGBS and Clay-Brick-Powder for 3D Concrete Printing
  18. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2023-01)
    3D Concrete Printing of Eco-Friendly Geopolymer Containing Brick Waste
  19. Zhang Chao, Jia Zijian, Luo Zhe, Deng Zhicong et al. (2022-11)
    Printability and Pore-Structure of 3D Printing Low-Carbon Concrete Using Recycled Clay-Brick-Powder with Various Particle-Features
  20. Christen Heidi, Cho Seung, Zijl Gideon, Villiers Wibke (2022-11)
    Phase-Change-Material-Infused Recycled Brick-Aggregate in 3D Printed Concrete
  21. Estévez Alberto, Abdallah Yomna (2022-10)
    The New Standard Is Biodigital:
    Durable and Elastic 3D Printed Biodigital Clay Bricks
  22. Christen Heidi, Zijl Gideon, Villiers Wibke (2022-05)
    The Incorporation of Recycled Brick-Aggregate in 3D Printed Concrete
  23. Sangiorgio Valentino, Parisi Fabio, Fieni Francesco, Parisi Nicola (2022-01)
    The New Boundaries of 3D-Printed Clay-Bricks-Design:
    Printability of Complex Internal Geometries
  24. Abdallah Yomna, Estévez Alberto (2021-10)
    3D Printed Biodigital Clay Bricks