Additive Manufacturing in Concrete Construction (2020-12)¶
Current Status
Vasilić Ksenija
Journal Article - Beton- und Stahlbetonbau, Vol. 115, Iss. 12, pp. 1006-1012
Abstract
The implementation of innovative concepts, such as digital concrete production and process automation, could lead to an increase in productivity and a reduction in material requirements in the concrete sector. The scientific community has recognized this potential, and global interest and the number of research and development activities on this topic are growing exponentially. High-quality digital manufacturing concepts are already being developed worldwide and successfully used to print a number of pilot projects. This article provides an overview of the most well-known additive manufacturing processes in concrete construction and key case studies. In addition, the open technical and technological questions are discussed. The focus is on the development of practical solutions and their implementation in the concrete sector.
¶
28 References
- Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
Additive Manufacturing of Concrete in Construction:
Potentials and Challenges of 3D Concrete Printing - Bos Freek, Wolfs Robert, Salet Theo (2020-06)
CCR Digital Concrete 2020 SI:
Editorial - Buswell Richard, Silva Wilson, Bos Freek, Schipper Roel et al. (2020-05)
A Process Classification Framework for Defining and Describing Digital Fabrication with Concrete - Buswell Richard, Silva Wilson, Jones Scott, Dirrenberger Justin (2018-06)
3D Printing Using Concrete-Extrusion:
A Roadmap for Research - Flatt Robert, Wangler Timothy (2018-08)
Editorial for Special Issue on Digital Concrete - Khoshnevis Behrokh (2003-11)
Automated Construction by Contour Crafting:
Related Robotics and Information Technologies - Khoshnevis Behrokh, Dutton Rosanne (1998-01)
Innovative Rapid Prototyping Process Makes Large-Sized, Smooth-Surfaced Complex Shapes in a Wide Variety of Materials - Khoshnevis Behrokh, Hwang Dooil, Yao Ke, Yeh Zhenghao (2006-05)
Mega-Scale Fabrication by Contour Crafting - Kloft Harald, Empelmann Martin, Hack Norman, Herrmann Eric et al. (2020-07)
Strategies for the Reinforcement for 3D-Concrete-Printing - Kloft Harald, Hack Norman, Mainka Jeldrik, Brohmann Leon et al. (2019-11)
Additive Manufacturing in Construction:
First 3D-Printed Reinforced Concrete Components Using Shotcrete 3D Printing (SC3DP) Technology - Kloft Harald, Krauss Hans-Werner, Hack Norman, Herrmann Eric et al. (2020-05)
Influence of Process Parameters on the Inter-Layer Bond Strength of Concrete Elements Additive Manufactured by Shotcrete 3D Printing - Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
Developments in Construction-Scale Additive Manufacturing Processes - Lloret-Fritschi Ena, Reiter Lex, Wangler Timothy, Gramazio Fabio et al. (2017-03)
Smart Dynamic Casting:
Slipforming with Flexible Formwork - Lloret-Fritschi Ena, Wangler Timothy, Gebhard Lukas, Mata-Falcón Jaime et al. (2020-05)
From Smart Dynamic Casting to a Growing Family of Digital Casting Systems - Lowke Dirk, Dini Enrico, Perrot Arnaud, Weger Daniel et al. (2018-07)
Particle-Bed 3D Printing in Concrete Construction:
Possibilities and Challenges - Lowke Dirk, Talke Daniel, Mai (née Dressler) Inka, Weger Daniel et al. (2020-05)
Particle-Bed 3D Printing by Selective Cement-Activation:
Applications, Material and Process Technology - Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
Extrusion-Based Additive Manufacturing with Cement-Based Materials:
Production Steps, Processes, and Their Underlying Physics - Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schneider Kai et al. (2019-11)
New Carbon Fiber Reinforcement for Digital, Automated Concrete Construction - Mechtcherine Viktor, Nerella Venkatesh (2018-02)
3D Printing with Concrete:
State-of-the-Art, Trends, Challenges - Mechtcherine Viktor, Nerella Venkatesh (2018-04)
Incorporating Reinforcement in 3D-Printing with Concrete - Mechtcherine Viktor, Nerella Venkatesh (2018-10)
3D-Concrete-Printing by Selective Deposition:
Requirements for Fresh Concrete and Testing - Menna Costantino, Mata-Falcón Jaime, Bos Freek, Vantyghem Gieljan et al. (2020-04)
Opportunities and Challenges for Structural Engineering of Digitally Fabricated Concrete - Pegna Joseph (1997-02)
Exploratory Investigation of Solid Freeform Construction - Salet Theo, Ahmed Zeeshan, Bos Freek, Laagland Hans (2018-05)
Design of a 3D Printed Concrete Bridge by Testing - Schutter Geert, Lesage Karel, Mechtcherine Viktor, Nerella Venkatesh et al. (2018-08)
Vision of 3D Printing with Concrete:
Technical, Economic and Environmental Potentials - Wangler Timothy, Lloret-Fritschi Ena, Reiter Lex, Hack Norman et al. (2016-10)
Digital Concrete:
Opportunities and Challenges - Wangler Timothy, Roussel Nicolas, Bos Freek, Salet Theo et al. (2019-06)
Digital Concrete:
A Review - Wu Peng, Wang Jun, Wang Xiangyu (2016-04)
A Critical Review of the Use of 3D Printing in the Construction Industry
6 Citations
- Placzek Gerrit, Schwerdtner Patrick (2024-10)
Comparison of Machine- and Performance Specifications of Concrete 3D Printers - Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2024-09)
Additive Flow Production of Lightweight Precision Concrete Elements - Neef Tobias, Müller Steffen, Mechtcherine Viktor (2024-03)
Integrating Continuous Mineral-Impregnated Carbon-Fibers into Digital Fabrication with Concrete - Reinold Janis, Gudžulić Vladislav, Meschke Günther (2023-03)
Computational Modeling of Fiber Orientation During 3D Concrete Printing - Zöller Raphael, Ochlast Andreas, Zimmert Florian, Braml Thomas (2022-02)
Development of Processes for the Automated Planning and Production of Individual Reinforced Concrete Elements - Mechtcherine Viktor, Mai (née Dressler) Inka, Empelmann Martin, Gehlen Christoph et al. (2021-09)
Digital Concrete Construction by Means of Additive Processes:
State of the Art and Research Needs
BibTeX
@article{vasi.2020.AMiCC,
author = "Ksenija Vasilić",
title = "Additive Manufacturing in Concrete Construction: Current Status",
doi = "10.1002/best.202000079",
year = "2020",
journal = "Beton- und Stahlbetonbau",
volume = "115",
number = "12",
pages = "1006--1012",
}
Formatted Citation
K. Vasilić, “Additive Manufacturing in Concrete Construction: Current Status”, Beton- und Stahlbetonbau, vol. 115, no. 12, pp. 1006–1012, 2020, doi: 10.1002/best.202000079.
Vasilić, Ksenija. “Additive Manufacturing in Concrete Construction: Current Status”. Beton- Und Stahlbetonbau 115, no. 12 (2020): 1006–12. https://doi.org/10.1002/best.202000079.