Skip to content

#wire

Keywords by Co - Occurrence

  1. Nan Bo, Qiao Youxin, Leng Junjie, Deng Zhengxing et al. (2026-04)
    Structural Performance of 3D Printed Concrete Reinforced with Bidirectional Steel Wire Mesh
  2. Zhang Genbao, Chen Lingke, Liu Miao, Morsy Amr et al. (2025-12)
    Enhancing the Shear Properties of U-Shaped Steel Wire Mesh Reinforced 3D Printed Composites
  3. Lin Manfang, Ding Yao, Yu Fan, Li Lingzhi et al. (2025-08)
    Synergistic Strengthening of 3D‑printed ECC Beams Through Steel-Wire Mesh and Interfaces Treatments
  4. Lin Manfang, Yu Kequan (2024-11)
    A Rapid Reinforcement-Technique Using FRP and Steel-Wire Mesh in 3D Printed ECC Beams
  5. Hojati Maryam, Sedghi Reza, Li Zhanzhao, Memari Ali et al. (2024-09)
    Flexural Strength of 3D Printed Concrete Beams:
    Exploring Barbed-Wire Reinforcement and Cross-Sectional Geometry
  6. Babovic Neira, Laghi Vittoria, Kloft Harald (2024-07)
    Branching Structure for Reinforcement Anchorage Produced with Wire and Arc Additive Manufacturing Technique
  7. Sun Chang, Li Jiawang, Liu Qiong, Chen Kailun et al. (2024-07)
    Compressive Performance and Damage Mechanism of Concrete Short Columns Confined by Steel-Wires-Reinforced 3DPM
  8. Straßer Alexander, Kränkel Thomas, Gehlen Christoph (2023-12)
    Integrating Wire Arc Additive Manufacturing into Selective Paste-Intrusion for Reinforced Concrete Elements:
    Effect of Temperature on the Mechanical Performance
  9. Kloft Harald, Schmitz Linus, Müller Christoph, Laghi Vittoria et al. (2023-01)
    Experimental Application of Robotic Wire and Arc Additive Manufacturing-Technique for Strengthening the I-Beam Profiles
  10. Liu Miao, Wang Li, Ma Guowei, Li Weiwei et al. (2022-11)
    U-Type Steel-Wire-Mesh for the Flexural Performance Enhancement of 3D Printed Concrete:
    A Novel Reinforcing Approach
  11. Hojati Maryam, Memari Ali, Zahabi Mehrzad, Wu Zhengyu et al. (2022-06)
    Barbed-Wire Reinforcement for 3D Concrete Printing
  12. Straßer Alexander, Weger Daniel, Matthäus Carla, Kränkel Thomas et al. (2021-11)
    Combining Wire and Arc Additive Manufacturing and Selective Paste-Intrusion for Additively Manufactured Structural Concrete
  13. Fischer Gregor, Paegle Ieva (2021-11)
    Reinforcement of Three-Dimensional-Printed Concrete Structures by Weaving and Knitting of Continuous Fibers and Wires
  14. Liu Miao, Zhang Qiyun, Tan Zhendong, Wang Li et al. (2021-01)
    Investigation of Steel-Wire-Mesh-Reinforcement Method for 3D Concrete Printing
  15. Weger Daniel, Baier Daniel, Straßer Alexander, Prottung Sophia et al. (2020-07)
    Reinforced Particle-Bed Printing by Combination of the Selective Paste-Intrusion Method with Wire and Arc Additive Manufacturing:
    A First Feasibility Study
  16. Søndergaard Asbjørn, Feringa Jelle, Stan Florin, Maier Dana (2018-09)
    Realization of Topology Optimized Concrete Structures Using Robotic Abrasive Wire-Cutting of Expanded Polystyrene Formwork
  17. Martins Pedro, Campos Paulo, Nunes Sandra, Sousa José (2018-09)
    The Tectonics of Digitally Fabricated Concrete:
    A Case for Robotic Hot Wire-Cutting