Skip to content

#volume

Keywords by Co - Occurrence

  1. Si Wen, Khan Mehran, McNally Ciaran (2025-11)
    Rheological Optimization and Mechanical Performance Assessment of High-Volume GGBS-Silica Fume Mortars for 3D Printing
  2. Kaya Ebru, Ciza Baraka, Yalçınkaya Çağlar, Felekoğlu Burak et al. (2024-11)
    Effect of Hydroxypropyl-Methylcellulose and Aggregate Volume on Fresh and Hardened Properties of 3D Printable Concrete
  3. Vasey Lauren, Chadha Kunaljit, Kango Ananya, Leung Victor et al. (2024-11)
    Impact Printing:
    A Novel Robotic Additive Manufacturing Method for Circular, High-Volume Construction
  4. Sadeghzadeh Benam Shaghayegh, Sandalci Ilgin, Kara Burhan, Bebek Özkan et al. (2024-11)
    Improving the 3D Printability of High-Volume Fly-Ash Mixtures Through Addition of Mineral Admixtures
  5. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
    Development of Ultra-Ductile Strain-Hardening 3D Printed Concrete Composite Utilizing Critical Fiber Volume and Coarse Aggregate
  6. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2024-09)
    Development of a Tool for Generating a Constant Volume-Flow with Peristaltic Pumps for Robot-Controlled Concrete-Extrusion
  7. Jongvisuttisun Passarin, Chaiyapoom Phattarakamon, Jiramarootapong Patiphat, Meemuk Kornravee et al. (2024-09)
    The Second 3D Printed Prefabricated Prefinished Volumetric Construction Building in Thailand:
    A New Sustainable and Efficient Approach for a Low-Rise Prefab Modular Building
  8. Saelens Lien, Wan-Wendner Roman, Caspeele Robby, Tittelboom Kim (2024-09)
    Material-Volume Reduction with Additive Manufacturing:
    Challenges for Structural Application
  9. Schönsee Eric, Jeyifous Olubunmi, Strangfeld Christoph, Hüsken Götz (2024-09)
    Investigations on Multi-Sensor Data for Monitoring Volume Flow During the Printing Process
  10. Anjos Marcos, Maia José, Souza Dias Leonardo, Medeiros Fernanda et al. (2024-09)
    Effect of the Geometry of Representative Volumetric Masonry Elements:
    Experimental and Numerical Analysis
  11. Sadeghzadeh Benam Shaghayegh, Sandalci Ilgin, Bundur Zeynep, Bebek Özkan (2024-09)
    Bio-Based Additives to Improve the Rheology of High-Volume Fly-Ash Cement-Based Mortar for 3D Printing
  12. Şahin Hatice, Mardani Ali, Mardani Naz (2024-07)
    Performance Requirements and Optimum Mix Proportion of High-Volume Fly-Ash 3D Printable Concrete
  13. Qiu Minghong, Qian Ye, Dai Jian-Guo (2024-05)
    Enhancing the Flexural Performance of Concrete Beams with 3D Printed UHP-SHCC Permanent Formwork via Graded Fiber Volume Fraction
  14. Colyn Markus, Zijl Gideon, Babafemi Adewumi (2024-02)
    Fresh and Strength Properties of 3D Printable Concrete Mixtures Utilising a High Volume of Sustainable Alternative Binders
  15. Sukontasukkul Piti, Khomkum Sila, Maho Buchit, Fujikake Kazunori (2023-09)
    Printability and Shape Stability of Cement Mortar Incorporating Low Volume of Micro-Polypropylene Fiber for 3D Printing Application
  16. Lachmayer Lukas, Müller Nico, Herlyn Thilo, Raatz Annika (2023-08)
    Volume Flow-Based Process-Control for Robotic Additive Manufacturing-Processes in Construction
  17. Nunes Gabrielly, Anjos Marcos, Lins Ana, Negreiros Ana et al. (2023-08)
    Evaluation of the Mechanical Behavior of Representative Volumetric Elements of 3DCP Masonry-Mixtures with Partial Replacement of Cement by Limestone-Filler and Metakaolin
  18. Xu Nuoyan, Qian Ye (2023-04)
    Effects of Fiber-Volume Fraction, Fiber Length, Water-Binder Ratio, and Nano-Clay Addition on the 3D Printability of Strain-Hardening Cementitious Composites
  19. Stieler David, Schwinn Tobias, Menges Achim (2022-03)
    Volumetric Intersections:
    Modularization Approaches for Freeform Prefab Concrete Construction
  20. Schryver Robin, Cheikh Khadija, Lesage Karel, Yardimci Mert et al. (2021-09)
    Numerical Reliability Study Based on Rheological Input for Bingham-Paste-Pumping Using a Finite Volume Approach in OpenFOAM
  21. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2021-08)
    Experimental Calibration and Compensation for the Continuous Effect of Time, Number of Layers and Volume of Material on Shape Deformation in Small-Scale Additive Manufacturing of Concrete
  22. Wu Yuching, Yang Qianfan, Kong Xiangrui, Zhi Peng et al. (2021-05)
    Uncertainty Quantification for the Representative Volume Element of Geometrically Mono-Clinic 3D Printed Concrete
  23. Liu Yan, Jewett Jackson, Carstensen Josephine (2020-07)
    Experimental Investigation of Topology-Optimized Deep Reinforced Concrete Beams with Reduced Concrete Volume
  24. Ivanova Irina, Mechtcherine Viktor (2020-03)
    Effects of Volume Fraction and Surface Area of Aggregates on the Static Yield-Stress and Structural Build-Up of Fresh Concrete
  25. Pham Luong, Lin Xiaoshan, Gravina R., Tran Jonathan (2019-12)
    Influence of PVA- and PP-Fibers at Different Volume Fractions on Mechanical Properties of 3D Printed Concrete
  26. Xu Jie, Ding Lieyun, Cai Lixiong, Zhang Lichao et al. (2019-04)
    Volume-Forming 3D Concrete Printing Using a Variable-Size Square Nozzle
  27. Panda Biranchi, Tan Ming (2018-11)
    Rheological Behavior of High-Volume Fly-Ash Mixtures Containing Micro-Silica for Digital Construction Application
  28. Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2018-11)
    Improving the 3D Printability of High-Volume Fly-Ash Mixtures via the Use of Nano-Attapulgite-Clay
  29. Xu Jie, Ding Lieyun (2018-07)
    Volume-Forming 3D Concrete Printing Using a Variable-Diameter Square Nozzle