Skip to content

#reduction

Keywords by Co - Occurrence

  1. Costa Gabriel, Maas Pyetra, Doerner Gabriel, Nazário Samara et al. (2026-01)
    Reducing the Cement Content in 3D Concrete Printing Mixtures Through Porcelain Polishing Residue Incorporation
  2. Wang Zherui, Teitelbaum E., Akbarzadeh Masoud, Aviv D. (2025-11)
    Experimental Assessment on Thermal Mass Performance of Structurally Optimized, 3D-Printed Concrete Floor Element for Carbon Emission Reduction
  3. Patel Abhishek, Raphael Benny (2025-07)
    Reducing Carbon Emissions in 3D Printed RCC Slabs
  4. Mostert Jean-Pierre, Kruger Jacques (2025-07)
    Reducing Anisotropic Behaviour of 3D Printed Concrete Through Interlocked Filaments
  5. Albrecht Sophie, Hellerbrand Stefan, Weininger Florian, Thiel Charlotte (2025-03)
    Possibilities for Reducing the Environmental Impact in the Construction Industry Using the Example of a 3D Printed Staircase
  6. Bayat Hamid, Kashani Alireza (2025-02)
    Reducing Material and Energy Consumption in Single-Story Buildings Through 3D-Printed Wall Designs
  7. Palazzo Andrea (2025-02)
    How 3D Printers for Houses Can Reduce CO2 Emissions
  8. Nienaber Linda, Kanyenze Simba, Combrinck Riaan (2024-11)
    Water Absorption Reduction of 3D Printed Concrete Using Silicones
  9. Oliveira Francisco, Picelli Sanches Renato, Nelli Silva Emílio, Barari Ahmad et al. (2024-10)
    Topology-Optimization in 3D Concrete Printing to Reduce Greenhouse Gas Emissions
  10. Tang Hong, Xiong Shiqi (2024-09)
    Comparative Analysis of Carbon-Emission Accounting and Carbon-Reduction-Effect of 3D Printed Concrete Structures at the Stage of Architecturalization
  11. Šahmenko Genādijs, Šinka Māris, Bumanis Girts, Sapata Alise et al. (2024-09)
    Ternary Gypsum-Cement-Pozzolan Composites for 3D Printing with Reduced Environmental Impact
  12. Saelens Lien, Wan-Wendner Roman, Caspeele Robby, Tittelboom Kim (2024-09)
    Material-Volume Reduction with Additive Manufacturing:
    Challenges for Structural Application
  13. Alencar Oliveira Francisco, Picelli Sanches Renato, Barari Ahmad, Oliveira Romano Roberto et al. (2024-09)
    Greenhouse Gases Emission Reduction Trough Topology-Optimization and 3D Printing
  14. Jarabo Rocío, Fuente González Elena, García Calvo José, Carballosa Pedro et al. (2024-08)
    Nano-Crystalline-Cellulose to Reduce Superplasticizer-Demand in 3D Printing of Cementitious Materials
  15. Patel Abhishek, Raphael Benny (2024-04)
    Robotic 3D Printing of Structural Slabs Using Polyethylene Waste as Filler to Reduce Carbon Footprint
  16. Corneliusen Julie, Horswill Duncan (2024-04)
    Reshaping Fabrication:
    A Case Study in Designing Carbon-Reduced Concrete Structures
  17. Herding Friedrich, Mai (née Dressler) Inka, Lowke Dirk (2023-12)
    Reduction of the Cement Content in Selective Cement-Activation
  18. Zhao Zengfeng, Ji Chenyuan, Xiao Jianzhuang, Yao Lei et al. (2023-11)
    A Critical Review on Reducing the Environmental Impact of 3D Printing Concrete:
    Material-Preparation, Construction-Process and Structure-Level
  19. Meng Qingcheng, Hu Lei, Li Mingjian, Qi Xin (2023-09)
    Assessing the Environmental Impact of Building Life Cycle:
    A Carbon-Reduction-Strategy Through Innovative Design, Intelligent Construction, and Secondary Utilization
  20. Jesus Manuel, Costa Joana, Teixeira João, Pessoa Ana Sofia et al. (2023-01)
    Use of Waste Materials to Reduce Cement and Natural Aggregates in 3D Printing Mortars
  21. Bischof Patrick, Mata-Falcón Jaime, Ammann Rebecca, Näsbom Andreas et al. (2022-12)
    Digitally Fabricated Weak Interfaces to Reduce Minimum Reinforcement in Concrete Structures
  22. Favier Aurélie, Petit Agnès (2022-06)
    Strategies for Reducing the Environmental Footprint of Additive Manufacturing via Sprayed Concrete
  23. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2022-06)
    Mitigating Early-Age Cracking in 3D Printed Concrete Using Fibers, Superabsorbent Polymers, Shrinkage Reducing Admixtures, B-CSA Cement and Curing Measures
  24. Barbosa Marcella, Anjos Marcos, Cabral Kleber, Souza Dias Leonardo (2022-05)
    Development of Composites for 3D Printing with Reduced Cement Consumption
  25. Liu Yan, Jewett Jackson, Carstensen Josephine (2020-07)
    Experimental Investigation of Topology-Optimized Deep Reinforced Concrete Beams with Reduced Concrete Volume
  26. Kontovourkis Odysseas, Phocas Marios, Tryfonos George, Georgiou Christos (2020-05)
    Multi-Axis 3D Printing of Material-Reduced Shell-Structures on a Reconfigurable Supporting-System Using Topology-Optimization Principles
  27. Tomé Ana, Vizotto Isaías, Valença Jónatas, Júlio Eduardo (2018-02)
    Innovative Method for Automatic Shape-Generation and 3D Printing of Reduced-Scale Models of Ultra-Thin Concrete Shells