Skip to content

#proportion

Keywords by Co - Occurrence

  1. Abbas Yassir, Alsaif Abdulaziz (2025-11)
    Explainable Data-Driven Modeling for Optimized Mix Design of 3D-Printed Concrete:
    Interpreting Nonlinear Synergies Among Binder Components and Proportions
  2. Sičáková Alena, Verčimák Dominik (2025-11)
    Lightweight Mixtures with a High Proportion of Recycled Fillers in Terms of 3D Printing Parameters
  3. Matos Ana, Emiroğlu Mehmet, Milheiro-Oliveira Paula (2025-09)
    Predicting Stabilized Soil Mixture Proportions for 3D Printing:
    Preliminary Study Using the Design of Experiments Approach
  4. Dong Wei, Zhang Changmin, Wang Junfeng, Zhang Xinjie et al. (2025-07)
    Optimal Design of Mix Proportions for 3D Printed Concrete with Ferrochrome Slag and Aeolian Sand
  5. Huseien Ghasan, Tan Shea, Saleh Ali, Lim Nor et al. (2024-08)
    Test-Procedures and Mechanical Properties of Three-Dimensional Printable Concrete Enclosing Different Mix-Proportions:
    A Review and Bibliometric Analysis
  6. Şahin Hatice, Mardani Ali, Mardani Naz (2024-07)
    Performance Requirements and Optimum Mix Proportion of High-Volume Fly-Ash 3D Printable Concrete
  7. Wang Xingjian, Naito Clay, Fox John, Bocchini Paolo (2024-02)
    Impact of Mix Proportions on Particle-Bed 3D Printed Concrete Properties
  8. Chen Yidong, Zhang Yu, Liu Zhiyong, Zhang Yunsheng et al. (2023-04)
    3D Printed Concrete Permanent Formwork:
    Effect of Post-Cast Concrete Proportion on Interface Bonding
  9. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Das Utpal et al. (2023-02)
    Optimization of Mix Proportion of 3D Printable Mortar Based on Rheological Properties and Material-Strength Using Factorial Design of Experiment
  10. Pham Thi, Nguyen Thu, Trinh Thanh, Nguyen Anh et al. (2022-08)
    Development of 3D Printers for Concrete Structures:
    Mix Proportion Design Approach and Laboratory Testing
  11. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Gawady Mohamed (2021-09)
    Developing Mix Proportions for Class C Fly-Ash-Based Alkali-Activated 3D Printed Concrete Mixtures
  12. Panda Biranchi, Tan Ming (2018-03)
    Experimental Study on Mix Proportion and Fresh Properties of Fly-Ash-Based Geopolymer for 3D Concrete Printing