Motives and Barriers for Offsite and Onsite Construction 3D Printing (2024-06)¶
al Balkhy Wassim, Valera Elias, Karmaoui Dorra, , Linner Thomas, Ayadi Syrine, Zerrari Reda, Boutabba Assia
Contribution - Proceedings of the 41st International Symposium on Automation and Robotics in Construction
Abstract
This study aims to compare between onsite and offsite construction 3D printing (C3DP). For this purpose, the Systematic Literature Review approach (SLR) was employed. The review which was based on studying 48 sources identified six categories to classify the motives and barriers for the two C3DP techniques; cost, transportation, design flexibility, workers and materials, production process, and environmental considerations. The literature identified the cost as the main factor that influences the choice between the two techniques. The presented list of motives and barriers is helpful to support decision-making in C3DP projects.
¶
30 References
- Adaloudis Max, Bonnin Roca Jaime (2021-05)
Sustainability Tradeoffs in the Adoption of 3D Concrete Printing in the Construction Industry - Ali Md., Issayev Gani, Shehab Essam, Sarfraz Shoaib (2022-02)
A Critical Review of 3D Printing and Digital Manufacturing in Construction Engineering - Balkhy Wassim, Bing Scott, Babidi Saad, Lafhaj Zoubeir et al. (2023-07)
The Analysis of Lean Wastes in Construction 3D Printing:
A Case Study - Batikha Mustafa, Jotangia Rahul, Baaj Mohamad, Mousleh Ibrahim (2021-12)
3D Concrete Printing for Sustainable and Economical Construction:
A Comparative Study - Bazli Milad, Ashrafi Hamed, Rajabipour Ali, Kutay Cat (2023-02)
3D Printing for Remote Housing:
Benefits and Challenges - Besklubova Svetlana, Tan Bing, Zhong Ray, Spicek Nikola (2023-04)
Logistic-Cost-Analysis for 3D Printing Construction Projects Using a Multi-Stage Network-Based Approach - Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
Additive Manufacturing of Concrete in Construction:
Potentials and Challenges of 3D Concrete Printing - Gislason Styrmir, Bruhn Simon, Breseghello Luca, Sen Burak et al. (2022-06)
Porous 3D Printed Concrete Beams Show an Environmental Promise:
A Cradle-to-Grave Comparative Life Cycle Assessment - Haar Bjorn, Kruger Jacques, Zijl Gideon (2023-05)
Off-Site Construction with 3D Concrete Printing - Jipa Mihail-Andrei, Dillenburger Benjamin (2022-04)
3D Printed Formwork for Concrete:
State of the Art, Opportunities, Challenges, and Applications - Khajavi Siavash, Tetik Müge, Mohite Ashish, Peltokorpi Antti et al. (2021-04)
Additive Manufacturing in the Construction Industry:
The Comparative Competitiveness of 3D Concrete Printing - Kothman Ivo, Faber Niels (2016-09)
How 3D Printing Technology Changes the Rules of the Game:
Insights from the Construction Sector - Krimi Imane, Lafhaj Zoubeir, Ducoulombier Laure (2017-05)
Prospective Study on the Integration of Additive Manufacturing to Building Industry:
Case of a French Construction Company - Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
Improving Performance of Additive Manufactured Concrete:
A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods - Lafhaj Zoubeir, Rabenantoandro Andry, Moussaoui Soufiane, Dakhli Zakaria et al. (2019-12)
Experimental Approach for Printability-Assessment:
Toward a Practical Decision-Making Framework of Printability for Cementitious Materials - Lim Jian, Panda Biranchi, Pham Quang-Cuong (2018-05)
Improving Flexural Characteristics of 3D Printed Geopolymer Composites with In-Process Steel-Cable-Reinforcement - Ning Xin, Liu Tong, Wu Chunlin, Wang Chao (2021-04)
3D Printing in Construction:
Current Status, Implementation Hindrances, and Development Agenda - Pasco Jubert, Lei Zhen, Aranas Clodualdo (2022-01)
Additive Manufacturing in Off-Site Construction:
Review and Future Directions - Placzek Gerrit, Schwerdtner Patrick (2023-07)
Concrete Additive Manufacturing in Construction:
Integration Based on Component-Related Fabrication-Strategies - Poullain Philippe, Paquet Elodie, Garnier Sébastien, Furet Benoît (2018-06)
On-Site Deployment of 3D Printing for the Building Construction:
The Case of YhnovaTM - Rollakanti Chiranjeevi, Prasad C. (2022-04)
Applications, Performance, Challenges and Current Progress of 3D Concrete Printing Technologies as the Future of Sustainable Construction:
A State of the Art Review - Sakin Mehmet, Kiroglu Yusuf (2017-10)
3D Printing of Buildings:
Construction of the Sustainable Houses of the Future by BIM - Schuldt Steven, Jagoda Jeneé, Hoisington Andrew, Delorit Justin (2021-03)
A Systematic Review and Analysis of the Viability of 3D Printed Construction in Remote Environments - Vantyghem Gieljan, Corte Wouter, Shakour Emad, Amir Oded (2020-01)
3D Printing of a Post-Tensioned Concrete Girder Designed by Topology-Optimization - Volpe Stelladriana, Sangiorgio Valentino, Petrella Andrea, Coppola Armando et al. (2021-08)
Building Envelope Prefabricated with 3D Printing Technology - Xiao Jianzhuang, Ji Guangchao, Zhang Yamei, Ma Guowei et al. (2021-06)
Large-Scale 3D Printing Concrete Technology:
Current Status and Future Opportunities - Xu Weiguo, Huang Shuyi, Han Dong, Zhang Zhiling et al. (2022-08)
Toward Automated Construction:
The Design-to-Printing Workflow for a Robotic In-Situ 3D Printed House - Yang Hongxiong, Chung Jacky, Chen Yuhong, Li Yijia (2018-06)
The Cost Calculation Method of Construction 3D Printing Aligned with Internet of Things - Zhang Xu, Li Mingyang, Lim Jian, Weng Yiwei et al. (2018-08)
Large-Scale 3D Printing by a Team of Mobile Robots - Žujović Maša, Obradović Radojko, Rakonjac Ivana, Milošević Jelena (2022-08)
3D Printing Technologies in Architectural Design and Construction:
A Systematic Literature Review
BibTeX
@inproceedings{balk_vale_karm_lafh.2024.MaBfOaOC3P,
author = "Wassim Al Balkhy and Elias Hernandez Valera and Dorra Karmaoui and Zoubeir Lafhaj and Thomas Linner and Syrine Ayadi and Reda Zerrari and Assia Boutabba",
title = "Motives and Barriers for Offsite and Onsite Construction 3D Printing",
doi = "10.22260/isarc2024/0154",
year = "2024",
booktitle = "Proceedings of the 41st International Symposium on Automation and Robotics in Construction",
editor = "Vincente Gonzalez-Moret and Jiansong Zhang and Borja García de Soto and Ioannis Brilakis",
}
Formatted Citation
W. A. Balkhy, “Motives and Barriers for Offsite and Onsite Construction 3D Printing”, in Proceedings of the 41st International Symposium on Automation and Robotics in Construction, 2024. doi: 10.22260/isarc2024/0154.
Balkhy, Wassim Al, Elias Hernandez Valera, Dorra Karmaoui, Zoubeir Lafhaj, Thomas Linner, Syrine Ayadi, Reda Zerrari, and Assia Boutabba. “Motives and Barriers for Offsite and Onsite Construction 3D Printing”. In Proceedings of the 41st International Symposium on Automation and Robotics in Construction, edited by Vincente Gonzalez-Moret, Jiansong Zhang, Borja García de Soto, and Ioannis Brilakis, 2024. https://doi.org/10.22260/isarc2024/0154.