Skip to content

#replacement

Keywords by Co - Occurrence

  1. Mo Jinxu, Lu Han, Ren Fengming, Lai Mianheng et al. (2026-02)
    Impact of Waste Rubber Powder Size and Replacement Ratio on the Compressive Strength Anisotropy and Pore Structure of 3D Printed Concrete
  2. Dey Dhrutiman, Panda Biranchi, Kole Jagabandhu (2026-02)
    Investigation into the Effect of Full Replacement with Portland Slag Cement and Screened Slag Sand for Development of Sustainable 3D Printed Concrete
  3. Kopitha Kirushnapillai, Rajeev Pathmanathan, Sanjayan Jay, Elakneswaran Yogarajah (2026-02)
    Buildability Enhancement of 3D Printed Concrete Using Carbonated Water and Partial Replacement of OPC with Reactive MgO
  4. Tafur Ginette, Rivera Cristhofer, Torres Pablo (2026-02)
    Evaluation of Sustainable 3D Concrete with Partial Replacement of Fine Aggregate by PET and Addition of Coconut Fibers:
    Impact on Construction with the Use of 3D Gantry-Type Printers in Peru
  5. Gencel Osman, Er Yusuf, Güler Onur, Ustaoğlu Abid et al. (2026-01)
    Replacing Natural Aggregates with Phase Change Material-Based 3D Printed Aggregates in Concrete for Structural Function and Dual Thermal Energy Storage
  6. Kamakshi Tippabhotla, Chau Bao, Tugelbayev Aidyn, McCoy Andrew et al. (2025-10)
    Developing 3D Printable Concrete Using Quarry by-Products as Partial Replacement for Cement
  7. Kua Harn, Shi A., Kajandran V., Lam T. et al. (2025-09)
    Toward Sustainable Construction 3D Printing:
    Limestone and Non-Calcined Recycled Marine Clay as Partial Cement Replacement
  8. Li Leo, Fei Zuojie, Jiao Chujie, Luo Tao et al. (2025-09)
    Bauxite Residue-Based 3D Printing Mortar:
    Enhancing Performance and Sustainability Through the Paste Replacement Approach
  9. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun (2025-09)
    Development of Sustainable 3D Printing Concrete Materials:
    Impact of Natural Minerals and Wastes at High Replacement Ratios
  10. Jankovský Ondřej, Lodňánek Petr, Lauermannová Anna-Marie, Jiříčková Adéla et al. (2025-08)
    Use of Ladle Furnace Slag as Filler Replacement in Magnesium Oxychloride Cement:
    Towards Sustainable 3D-Printable Building Composites
  11. Si Wen, Khan Mehran, McNally Ciaran (2025-08)
    Effect of Nano Silica with High Replacement of GGBS on Enhancing Mechanical Properties and Rheology of 3D Printed Concrete
  12. Thib Raghed, Taleb Maria, Belayachi Naima, Bulteel David et al. (2025-05)
    Hardened Properties of 3D Printable Mortars with Full Replacement of Natural Sand by Recycled Sand
  13. Tseng Kuo-Chang, Chi Maochieh, Yeih Weichung, Huang Ran (2025-04)
    Influence of Slag/Fly Ash as Partial Cement Replacement on Printability and Mechanical Properties of 3D-Printed Concrete
  14. Tran Mien, Le Thanh, Cao Nguyen, Nguyen Thi (2025-03)
    Sustainable Prospect for Entire Replacement of River Sand with Recycled Glass Aggregate in 3D Printing Concrete:
    Rheological Properties, Printability, and Alkali-Silica Reaction
  15. Samrani Phebe, Cao Yifang, Fimbres-Weihs Gustavo, Sanjaya Eric et al. (2024-09)
    Effect of Fly-Ash and Ground Waste Glass as Cement Replacement in Concrete 3D Printing for Sustainable Construction
  16. Corfe Ian (2024-09)
    A Digital Library for Using Mine-Tailings in Low-Carbon Concrete Replacements for Mine Back-Filling & 3D Printing
  17. Hierden Naomi, Yu Q., Brouwers Henricus (2024-09)
    Mechano-Chemically Activated Local Clays as Sustainable Binder Replacement for 3D Concrete Mixtures
  18. Egawa Ryo, Nezu Shoichi, Nishijo Keisuke, Ohno Kazunori et al. (2024-09)
    Different Sized Metal Reinforcement Insertion System Using Cartridge Replacement Mechanism for 3D Concrete Printer
  19. Zhu Ronghua, Egbe King-James, Salehi Hadi, Shi Zhongtian et al. (2024-01)
    Eco-Friendly 3D Printed Concrete with Fine Aggregate Replacements:
    Fabrication, Characterization and Machine Learning Prediction
  20. Azimi Zahir, Mousavi Moein, Bengar Habib, Javadi Akbar (2023-12)
    Study on the Post-Fire Mechanical Properties of Lightweight 3D Printed Concrete Containing Expanded Perlite as Partial Replacement of Natural Sand
  21. Nunes Gabrielly, Anjos Marcos, Lins Ana, Negreiros Ana et al. (2023-08)
    Evaluation of the Mechanical Behavior of Representative Volumetric Elements of 3DCP Masonry-Mixtures with Partial Replacement of Cement by Limestone-Filler and Metakaolin
  22. Rahmat N., Ali Noorwirdawati, Abdullah Siti, Abdul Hamid Noor et al. (2023-06)
    Fresh Properties and Flexural Strength of 3D Printing Sustainable Concrete Containing GGBS as Partial Cement Replacement
  23. Samad Nur, Abdullah Siti, Ibrahim Mustaffa, Shahidan Shahiron et al. (2022-05)
    Initial Properties of 3D Printing Concrete Using Rice-Husk-Ash as Partial Cement Replacement
  24. Yang Huashan, Che Yujun (2022-01)
    Recycling of Aggregate Micro-Fines as a Partial Replacement for Fly-Ash in 3D Printing Cementitious Materials