Skip to content

Flow Characteristics of Cement Mortar with Varied Silica-Fume for Additive Construction (2022-10)

10.1007/978-981-99-2676-3_16

Diwan Anushree, Patel Shiv, Pal Ankit,  Dwivedi Ashutosh, Shukla J., Panthi S., Agrawal Ramakant
Contribution - Proceedings from the International Conference on Recent Advances in Civil Engineering, pp. 191-201

Abstract

3D concrete printing (3DCP) technology is a new age construction technique using a novel cementitious mix to construct an object by depositing the material in layers without the presence of any formwork, unlike the conventional construction technique. It is a novel concept in the construction field which reduces the wastage of material, saves precious project time and also reduces the overall construction cost, making it of greater importance from a research point of view. Cement mortar for 3D concrete printing also called additive construction, must possess the optimum flowability, extrudability, open time, and buildability characteristics to pass through the batch mixer hose into the pump hopper and then extrude through the hose, and lastly the printer nozzle to print the structural component in pre-defined computer programmed structure. Characteristics of the cement mortar are influenced by the inclusion of additives in the mix. This paper focuses on the flowability characteristic of the design mix, particularly the effect of variation of silica fume and polycarboxylate superplasticizer in the mix.

12 References

  1. Ahmed Ghafur, Askandar Nasih, Jumaa Ghazi (2022-07)
    A Review of Large-Scale 3DCP:
    Material-Characteristics, Mix-Design, Printing-Process, and Reinforcement-Strategies
  2. Baz Bilal, Aouad Georges, Rémond Sébastien (2020-01)
    Effect of the Printing Method and Mortar’s Workability on Pull-Out Strength of 3D Printed Elements
  3. Dwivedi Ashutosh, Pal Ankit, Patel Shiv, Chourasia Ajay et al. (2020-10)
    Evaluation of Model 3D Printer and Design Mix for 3D Concrete Printing
  4. Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2021-05)
    Extrusion Rheometer for 3D Concrete Printing
  5. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
    Mix-Design and Fresh Properties for High-Performance Printing Concrete
  6. Panda Biranchi, Tan Ming (2018-03)
    Experimental Study on Mix Proportion and Fresh Properties of Fly-Ash-Based Geopolymer for 3D Concrete Printing
  7. Perrot Arnaud, Rangeard Damien, Pierre Alexandre (2015-02)
    Structural Build-Up of Cement-Based Materials Used for 3D Printing-Extrusion-Techniques
  8. Rahul Attupurathu, Santhanam Manu, Meena Hitesh, Ghani Zimam (2018-12)
    3D Printable Concrete:
    Mixture-Design and Test-Methods
  9. Rehman Atta, Kim Jung-Hoon (2021-07)
    3D Concrete Printing:
    A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics
  10. Saruhan Vedat, Keskinateş Muhammer, Felekoğlu Burak (2022-04)
    A Comprehensive Review on Fresh State Rheological Properties of Extrusion-Mortars Designed for 3D Printing Applications
  11. Tay Yi, Qian Ye, Tan Ming (2019-05)
    Printability-Region for 3D Concrete Printing Using Slump- and Slump-Flow-Test
  12. Zhang Yu, Zhang Yunsheng, Liu Guojian, Yang Yonggan et al. (2018-04)
    Fresh Properties of a Novel 3D Printing Concrete Ink

1 Citations

  1. Teixeira João, Jesus Manuel, Rangel Bárbara, Alves Jorge et al. (2026-01)
    Evaluation of Printing Performance of Cementitious Pastes with Alternative Powders

BibTeX 
@inproceedings{diwa_pate_pal_dwiv.2024.FCoCMwVSFfAC,
  author            = "Anushree Diwan and Shiv Singh Patel and Ankit Pal and Ashutosh Dwivedi and J. P. Shukla and S. K. Panthi and Ramakant Agrawal",
  title             = "Flow Characteristics of Cement Mortar with Varied Silica-Fume for Additive Construction",
  doi               = "10.1007/978-981-99-2676-3_16",
  year              = "2024",
  volume            = "352",
  pages             = "191--201",
  booktitle         = "Proceedings from the International Conference on Recent Advances in Civil Engineering: Latest Developments in Civil Engineering",
  editor            = "Krishna Kant Pathak and Bandara, J. M. S. J. and Ramakant Agrawal",
}
Formatted Citation

A. Diwan, “Flow Characteristics of Cement Mortar with Varied Silica-Fume for Additive Construction”, in Proceedings from the International Conference on Recent Advances in Civil Engineering: Latest Developments in Civil Engineering, 2024, vol. 352, pp. 191–201. doi: 10.1007/978-981-99-2676-3_16.

Diwan, Anushree, Shiv Singh Patel, Ankit Pal, Ashutosh Dwivedi, J. P. Shukla, S. K. Panthi, and Ramakant Agrawal. “Flow Characteristics of Cement Mortar with Varied Silica-Fume for Additive Construction”. In Proceedings from the International Conference on Recent Advances in Civil Engineering: Latest Developments in Civil Engineering, edited by Krishna Kant Pathak, J. M. S. J. Bandara, and Ramakant Agrawal, 352:191–201, 2024. https://doi.org/10.1007/978-981-99-2676-3_16.