Skip to content

#correlation

Keywords by Co - Occurrence

  1. Patel Aniket, Tripathi Avinaya, Kiran Ravi, Santhanam Manu et al. (2025-11)
    Decoupling Early-Age Free Shrinkage and Restraint Effects in 3D Printed Concrete Using Digital Image Correlation
  2. Sun Yan, Mudasir Maryam (2025-09)
    3D Printing Performance of Strain-Hardening Cementitious Composites with Different UHMWPE Fibers in Correlation with Rheology
  3. Gautam Kushagra, Solav Dana, Barath Shany, Austern Guy (2025-03)
    Using Digital Image Correlation to Analyze Deformation in Wood-Based Liquid Deposition Modelling
  4. Bao Ta, Yeakleang Muy, Abdelouhab Sandra, Courard Luc (2024-10)
    Testing Mortars for 3D Printing:
    Correlation with Rheological Behavior
  5. Jeyifous Olubunmi, Schönsee Eric, Strangfeld Christoph, Hüsken Götz (2024-09)
    Correlation of Continuously Measured In-Line Process Parameters and Extruded Geometry in 3D Concrete Printing Experiments
  6. Kurup Davya, Rahul Attupurathu (2024-09)
    Early-Age Shrinkage Measurement in 3D Printed Con-Crete by Digital Image Correlation:
    Influence of Spray Paints
  7. Xu Zhuoyue, Zhang Dawang, Li Hui, Jin Haoyu et al. (2023-06)
    Mix-Design and 3D Printing Correlation-Performance of PCC-Based 3DPM
  8. Zbyszyński Wojciech, Pietras Daniel, Sadowski Tomasz (2023-04)
    Data-Image-Correlation-Analysis of the Destruction-Process of 3D Printable Layered Beams Subjected to the Three-Point Bending Process
  9. Markin Slava, Mechtcherine Viktor (2023-03)
    Quantification of Plastic Shrinkage and Plastic Shrinkage Cracking of the 3D Printable Concretes Using 2D Digital Image Correlation
  10. Lee Keon-Woo, Lee Hojae, Choi Myoungsung (2022-07)
    Correlation Between Thixotropic Behavior and Buildability for 3D Concrete Printing
  11. Jacquet Yohan, Perrot Arnaud, Picandet Vincent (2022-06)
    Monitoring Strain Using Digital Image Correlation During Compressive and Tensile Loading:
    Assessment of Critical Strain of Cement-Based Materials Containing VMA
  12. Xu Yanqun, Yuan Qiang, Li Zemin, Shi Caijun et al. (2021-09)
    Correlation of Inter-Layer Properties and Rheological Behaviors of 3DPC with Various Printing Time Intervals
  13. Lee Hojae, Kim Jang-Ho, Moon Jae-Heum, Kim Won-Woo et al. (2019-08)
    Correlation Between Pore Characteristics and Tensile Bond Strength of Additive Manufactured Mortar Using X-Ray Computed Tomography
  14. Wolfs Robert, Bos Freek, Salet Theo (2018-06)
    Correlation Between Destructive Compression Tests and Non-Destructive Ultrasonic Measurements on Early-Age 3D Printed Concrete