Robotics and Automated Systems in Construction (2019-07)¶
Davila Delgado Juan, Oyedele Lukumon, Ajayi Anuoluwapo, , Akinade Olugbenga, Bilal Muhammad, Owolabi Hakeem
Journal Article - Journal of Building Engineering, Vol. 26
Abstract
The construction industry is a major economic sector, but it is plagued with inefficiencies and low productivity. Robotics and automated systems have the potential to address these shortcomings; however, the level of adoption in the construction industry is very low. This paper presents an investigation into the industry-specific factors that limit the adoption in the construction industry. A mixed research method was employed combining literature review, qualitative and quantitative data collection and analysis. Three focus groups with 28 experts and an online questionnaire were conducted. Principal component and correlation analyses were conducted to group the identified factors and find hidden correlations. The main identified challenges were grouped into four categories and ranked in order of importance: contractor-side economic factors, client-side economic factors, technical and work-culture factors, and weak business case factors. No strong correlation was found among factors. This study will help stakeholders to understand the main industry-specific factors limiting the adoption of robotics and automated systems in the construction industry. The presented findings will support stakeholders to devise mitigation strategies.
¶
8 References
- Buchli Jonas, Giftthaler Markus, Kumar Nitish, Lussi Manuel et al. (2018-07)
Digital In-Situ Fabrication:
Challenges and Opportunities for Robotic In-Situ Fabrication in Architecture, Construction, and Beyond - Delgado Camacho Daniel, Clayton Patricia, Brien William, Seepersad Carolyn et al. (2018-02)
Applications of Additive Manufacturing in the Construction Industry:
A Forward-Looking Review - Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
Developments in Construction-Scale Additive Manufacturing Processes - Perkins Isaac, Skitmore Martin (2015-03)
Three-Dimensional Printing in the Construction Industry:
A Review - Soto Borja, Agustí-Juan Isolda, Hunhevicz Jens, Joss Samuel et al. (2018-05)
Productivity of Digital Fabrication in Construction:
Cost and Time-Analysis of a Robotically Built Wall - Tay Yi, Panda Biranchi, Paul Suvash, Mohamed Nisar et al. (2017-05)
3D Printing Trends in Building and Construction Industry:
A Review - Wu Peng, Wang Jun, Wang Xiangyu (2016-04)
A Critical Review of the Use of 3D Printing in the Construction Industry - Zhang Xu, Li Mingyang, Lim Jian, Weng Yiwei et al. (2018-08)
Large-Scale 3D Printing by a Team of Mobile Robots
31 Citations
- Sawicki Bartłomiej, Düking Peter, Placzek Gerrit, Masur Lukas et al. (2026-01)
Human-Robot Collaboration in Digital Fabrication with Concrete:
Quantifying Productivity and Psychophysiological Strain of Human Workers - Murtaza Ghulam, Baldinelli Giorgio (2025-08)
Revolutionizing Architecture:
3D Printing in Large Construction Industry and Strategic Innovations for Enhanced Performance - Zhang Yuying, Zhu Xiaohong, Li Muduo, Zhang Chao et al. (2025-04)
3D Printing Technology in Concrete Construction - Zargar Seyed, Leicht Robert, Wagner Alan, Duarte José et al. (2025-01)
Beyond Trial and Error:
Toward Construction-Aware Early Design-Optimization Considering Robotic Capabilities - Nadi Mouad, Majdoubi Hicham, Haddaji Younesse, Bili Oumaima et al. (2025-01)
Digital Fabrication Processes for Cementitious Materials Using Three-Dimensional 3D Printing Technologies - Hassan Amer, Alomayri Thamer, Noaman Mohammed, Zhang Chunwei (2025-01)
3D Printed Concrete for Sustainable Construction:
A Review of Mechanical Properties and Environmental Impact - Alotaibi Badr, Ibrahim Shema Abdulsalam, Umar Ibrahim Abdullahi, Awad Abuhussain Mohammed et al. (2024-08)
Assimilation of 3D Printing, Artificial Intelligence and Internet of Things for the Construction of Eco-Friendly Intelligent Homes:
An Explorative Review - Abbasnejad Behzad, Soltani Sahar, Karamoozian Amirhossein, Gu Ning (2024-08)
A Systematic Literature Review on the Integration of Industry 4.0 Technologies in Sustainability Improvement of Transportation Construction Projects:
State of the Art and Future Directions - Aghaee Kamran, Li Linfei, Roshan Alireza, Namakiaraghi Parsa (2024-08)
Additive Manufacturing Evolution in Construction:
From Individual Terrestrial to Collective, Aerial, and Extraterrestrial Applications - Wang Tingpeng, Mao Chao, Sun Bing, Li Zhiqiang (2024-07)
Genealogy of Construction Robotics - Alhaidary Haidar (2024-03)
Three-Dimensional Concrete Printing as a Construction-Automation-Strategy and Assessments from a Case Study Building - İlcan Hüseyin, Külak Adnan, Şahmaran Mustafa (2024-03)
3D Printable Construction and Demolition Waste-Based Geopolymer:
Investigating the Effects of Additives on Engineering Properties - Gappmeier Peter, Reichenbach Sara, Kromoser Benjamin (2024-03)
Advances in Formwork Automation, Structure and Materials in Concrete Construction - Barjuei Erfan, Capitanelli Alessio, Bertolucci Riccardo, Courteille Eric et al. (2024-03)
Digital Workflow for Printability Checking and Prefabrication in Robotic Construction 3D Printing Based on Artificial Intelligence Planning - Dams Barrie, Chen Binling, Kaya Yusuf, Orr Lachlan et al. (2024-03)
Fresh Properties and Autonomous Deposition of Pseudoplastic Cementitious Mortars for Aerial Additive Manufacturing - Kaya Yusuf, Orr Lachlan, Kocer Basaran, Kovac Mirko (2023-12)
Aerial Repair and Aerial Additive Manufacturing - Li Huanbao, Li Zihan, Skibniewski Mirosław, Wang Liang et al. (2023-11)
Molding-Quality-Control with Non-Linear Forming-Method in 3D Cement Printing - Wu Huanyu, Liu Yongqi, Chang Ruidong, Wu Lingyi (2023-09)
Research Status Quo and Trends of Construction Robotics:
A Bibliometric Analysis - Sukontasukkul Piti, Khomkum Sila, Maho Buchit, Fujikake Kazunori (2023-09)
Printability and Shape Stability of Cement Mortar Incorporating Low Volume of Micro-Polypropylene Fiber for 3D Printing Application - Núñez Varillas Christoper, Regalado Espinoza Marck, Gago Gamboa Angela (2023-07)
3D Printing:
An Opportunity for the Sustainable Development of Building Construction - Kazemian Ali, Giwa Ilerioluwa, Ekenel Mahmut (2023-06)
Large-Scale Additive Manufacturing for Automated Construction:
An Overview - Zhang Daobo, Feng Peng, Zhou Peizhao, Xu Weiguo et al. (2023-06)
3D Printed Concrete Walls Reinforced with Flexible FRP Textile:
Automatic Construction, Digital Rebuilding, and Seismic Performance - Graser Konrad, Walzer Alexander, Hunhevicz Jens, Jähne René et al. (2023-06)
Qualitative Technology Evaluation of Digital Fabrication with Concrete:
Conceptual Framework and Scoreboard - Haar Bjorn, Kruger Jacques, Zijl Gideon (2023-05)
Off-Site Construction with 3D Concrete Printing - Li Zihan, Liu Huanbao, Cheng Xiang, Nie Ping et al. (2022-12)
Improvement of 3D Printing Cement-Based Material-Process:
Parameter Experiment and Analysis - Zhang Ketao, Chermprayong Pisak, Xiao Feng, Tzoumanikas Dimos et al. (2022-09)
Aerial Additive Manufacturing with Multiple Autonomous Robots - Kajzr Daniel, Břoušek Josef, Petr Tomas, Beran Leoš et al. (2021-12)
New Design of PLC-Based Robotic Control System for Concrete Printing in Building Construction - Abdallah Yomna, Estévez Alberto (2021-10)
3D Printed Biodigital Clay Bricks - Volpe Stelladriana, Sangiorgio Valentino, Petrella Andrea, Coppola Armando et al. (2021-08)
Building Envelope Prefabricated with 3D Printing Technology - Pradhananga Piyush, ElZomor Mohamed, Santi Kasabdji Gabriella (2021-02)
Identifying the Challenges to Adopting Robotics in the US Construction Industry - Hossain Md., Zhumabekova Altynay, Paul Suvash, Kim Jong (2020-10)
A Review of 3D Printing in Construction and Its Impact on the Labor Market
BibTeX
@article{davi_oyed_ajay_akan.2019.RaASiC,
author = "Juan Manuel Davila Delgado and Lukumon Oyedele and Anuoluwapo Ajayi and Lukman Akanbi and Olugbenga Akinade and Muhammad Bilal and Hakeem Owolabi",
title = "Robotics and Automated Systems in Construction: Understanding Industry-Specific Challenges for Adoption",
doi = "10.1016/j.jobe.2019.100868",
year = "2019",
journal = "Journal of Building Engineering",
volume = "26",
}
Formatted Citation
J. M. D. Delgado, “Robotics and Automated Systems in Construction: Understanding Industry-Specific Challenges for Adoption”, Journal of Building Engineering, vol. 26, 2019, doi: 10.1016/j.jobe.2019.100868.
Delgado, Juan Manuel Davila, Lukumon Oyedele, Anuoluwapo Ajayi, Lukman Akanbi, Olugbenga Akinade, Muhammad Bilal, and Hakeem Owolabi. “Robotics and Automated Systems in Construction: Understanding Industry-Specific Challenges for Adoption”. Journal of Building Engineering 26 (2019). https://doi.org/10.1016/j.jobe.2019.100868.