The Multi-Storey Concrete Printing Construction Technology (2020-11)¶

10.1007/978-3-030-72404-7_40

Krotov Oleg, Lazarev Yuriy, Velichkin Viktor, Petrochenko Marina, Belyaeva Svetlana, de Andrade Romero Marcelo
Contribution - Proceedings of the International Scientific Conference on Energy, Environmental and Construction Engineering, pp. 411-420

Abstract

In this article the method of multi-storey concrete printing construction is considered. This way of concrete printing can be effectively used not only in civil and industrial construction but also in road, bridge, tunnel and hydrotechnical construction. The concrete printing in this article is supported by the 3 steps model preparation – designing the model in 2D or 3D in design program, slicing and finally operating the whole process. The main printing element is occurred as extruder working with concrete of different density and other thermal insulation materials. Extruder’s performance was defined by analytical method. The main task of the study determined in comparing of single and multi-extruder storey printing performance with conventional monolithic construction and in defining the most optimal quantity of extruders. It was determined that the quantity of extruders depends on the size of the building and by exceeding one of the parameters the quantity of extruders rises.

¶

17 References

0 Citations

BibTeX

@inproceedings{krot_laza_veli_petr.2020.TMSCPCT,
  author            = "Oleg Krotov and Yuriy Lazarev and Viktor Velichkin and Marina Petrochenko and Svetlana Belyaeva and Marcelo de Andrade Romero",
  title             = "The Multi-Storey Concrete Printing Construction Technology",
  doi               = "10.1007/978-3-030-72404-7_40",
  year              = "2020",
  volume            = "150",
  pages             = "411--420",
  booktitle         = "Proceedings of the International Scientific Conference on Energy, Environmental and Construction Engineering",
  editor            = "Nikolai Ivanovich Vatin and Anatolijs Borodinecs and Bagdat Teltayev",
}

Formatted Citation

IEEE

O. Krotov, Y. Lazarev, V. Velichkin, M. Petrochenko, S. Belyaeva and M. de Andrade Romero, “The Multi-Storey Concrete Printing Construction Technology”, in Proceedings of the International Scientific Conference on Energy, Environmental and Construction Engineering, 2020, vol. 150, pp. 411–420. doi: 10.1007/978-3-030-72404-7_40.

CMOS

Krotov, Oleg, Yuriy Lazarev, Viktor Velichkin, Marina Petrochenko, Svetlana Belyaeva, and Marcelo de Andrade Romero. “The Multi-Storey Concrete Printing Construction Technology”. In Proceedings of the International Scientific Conference on Energy, Environmental and Construction Engineering, edited by Nikolai Ivanovich Vatin, Anatolijs Borodinecs, and Bagdat Teltayev, 150:411–20, 2020. https://doi.org/10.1007/978-3-030-72404-7_40.