Mechanical Properties of 3D Printed ECC Beams Reinforced with FRP Mesh (2024-07)¶
Jiang Fangming, Lin Manfang,
Contribution - Construction 3D Printing, pp. 213-221
Abstract
3D-printed engineered cementitious composites (ECC) members have gained increasing attention in recent years. However, the normal 3D-printed ECC beam has limited flexural strength and thus needs to be further reinforced. This paper proposed a novel reinforcement method applying fibre-reinforced polymer (FRP) mesh on the ECC interface in the 3D concrete printing process. Two types of ECCs with different strain capacities were used in this paper. The effect of the proposed reinforcement on these two types of ECC beams was experimentally investigated. The results demonstrated that the reinforced ECC beams presented better flexural strength. The improvement of ductility was obtained in the low-strain capacity ECC beams, while a reduction of ductility occurred in the high-strain capacity ECC beams. The compatibility of FRP with different strain capacity ECC was discussed based on the crack propagation observed by the digital image correlation (DIC) method.
¶
8 References
- Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2020-10)
Development of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction - Asprone Domenico, Menna Costantino, Bos Freek, Salet Theo et al. (2018-06)
Rethinking Reinforcement for Digital Fabrication with Concrete - Ding Tao, Xiao Jianzhuang, Zou Shuai, Zhou Xinji (2020-08)
Anisotropic Behavior in Bending of 3D Printed Concrete Reinforced with Fibers - Hambach Manuel, Volkmer Dirk (2017-02)
Properties of 3D Printed Fiber-Reinforced Portland-Cement-Paste - Kazemian Ali, Yuan Xiao, Cochran Evan, Khoshnevis Behrokh (2017-04)
Cementitious Materials for Construction-Scale 3D Printing:
Laboratory Testing of Fresh Printing Mixture - Perrot Arnaud, Rangeard Damien, Nerella Venkatesh, Mechtcherine Viktor (2019-02)
Extrusion of Cement-Based Materials:
An Overview - Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2018-06)
The Role of Early-Age Structural Build-Up in Digital Fabrication with Concrete - Zhu Binrong, Pan Jinlong, Zhou Zhenxin, Cai Jingming (2021-04)
Mechanical Properties of Engineered Cementitious Composites Beams Fabricated by Extrusion-Based 3D
0 Citations
BibTeX
@inproceedings{jian_lin_yu.2024.MPo3PEBRwFM,
author = "Fangming Jiang and Manfang Lin and Kequan Yu",
title = "Mechanical Properties of 3D Printed ECC Beams Reinforced with FRP Mesh",
doi = "10.1007/978-3-031-64269-2_27",
year = "2024",
pages = "213--221",
booktitle = "Construction 3D Printing: Selected Papers from the 4th International Conference on 3D Construction Printing Conference",
editor = "Ming Jen Tan and Mingyang Li and Yi Wei Daniel Tay and Teck Neng Wong and Paulo Jorge Bartolo",
}
Formatted Citation
F. Jiang, M. Lin and K. Yu, “Mechanical Properties of 3D Printed ECC Beams Reinforced with FRP Mesh”, in Construction 3D Printing: Selected Papers from the 4th International Conference on 3D Construction Printing Conference, 2024, pp. 213–221. doi: 10.1007/978-3-031-64269-2_27.
Jiang, Fangming, Manfang Lin, and Kequan Yu. “Mechanical Properties of 3D Printed ECC Beams Reinforced with FRP Mesh”. In Construction 3D Printing: Selected Papers from the 4th International Conference on 3D Construction Printing Conference, edited by Ming Jen Tan, Mingyang Li, Yi Wei Daniel Tay, Teck Neng Wong, and Paulo Jorge Bartolo, 213–21, 2024. https://doi.org/10.1007/978-3-031-64269-2_27.