Skip to content

A New Way to Design Software for Industrial Automation (2021-03)

3D Printer Cement Mixtures

10.17973/mmsj.2021_03_2020063

Vojir Martin,  Myslivec Tomáš,  Petr Tomas,  Břoušek Josef, Beran Leoš, Diblik Martin,  Keller Petr,  Kajzr Daniel, Vozenilek Robert
Journal Article - MM Science Journal, Vol. 2021, Iss. 1, pp. 4223-4229

Abstract

This paper presents a new way of developing machine software for the automation industry. This example focuses on a 3D printer intended for printing cement mixtures. The mechanical and electrical construction is shown for clarification. New mappTechnology by a company called B&R is explained, highlighting its benefits t for software developers. Both the advantages and disadvantages are discussed at the end.

3 References

  1. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
    Hardened Properties of High-Performance Printing Concrete
  2. Wolfs Robert, Bos Freek, Salet Theo (2019-03)
    Hardened Properties of 3D Printed Concrete:
    The Influence of Process Parameters on Inter-Layer Adhesion
  3. Wolfs Robert, Suiker Akke (2019-06)
    Structural Failure During Extrusion-Based 3D Printing Processes

6 Citations

  1. Keller Petr, Mendřický Radomír (2025-09)
    Analysis of Object Deformations Printed by Additive Manufacturing from Concrete Mixtures over Time
  2. Kajzr Daniel, Myslivec Tomáš, Černohorský Josef (2024-05)
    Modelling, Analysis and Comparison of Robot Energy Consumption for Three-Dimensional Concrete Printing Technology
  3. Kajzr Daniel, Myslivec Tomáš, Černohorský Josef (2023-07)
    An Open PLC-Based Robot-Control-System for 3D Concrete Printing
  4. Mendřický Radomír, Keller Petr (2023-01)
    Analysis of Object-Deformations Printed by Extrusion of Concrete-Mixtures Using 3D-Scanning
  5. Břoušek Josef, Petr Tomas, Beran Leoš, Myslivec Tomáš et al. (2022-03)
    Robotic Arm-Design, Development and Control for Printing Cement-Mixtures
  6. Kajzr Daniel, Břoušek Josef, Petr Tomas, Beran Leoš et al. (2021-12)
    New Design of PLC-Based Robotic Control System for Concrete Printing in Building Construction

BibTeX 
@article{voji_mysl_petr_brou.2021.ANWtDSfIA,
  author            = "Martin Vojir and Tomáš Myslivec and Tomas Petr and Josef Břoušek and Leoš Beran and Martin Diblik and Petr Keller and Daniel Kajzr and Robert Vozenilek",
  title             = "A New Way to Design Software for Industrial Automation: 3D Printer Cement Mixtures",
  doi               = "10.17973/mmsj.2021_03_2020063",
  year              = "2021",
  journal           = "MM Science Journal",
  volume            = "2021",
  number            = "1",
  pages             = "4223--4229",
}
Formatted Citation

M. Vojir, “A New Way to Design Software for Industrial Automation: 3D Printer Cement Mixtures”, MM Science Journal, vol. 2021, no. 1, pp. 4223–4229, 2021, doi: 10.17973/mmsj.2021_03_2020063.

Vojir, Martin, Tomáš Myslivec, Tomas Petr, Josef Břoušek, Leoš Beran, Martin Diblik, Petr Keller, Daniel Kajzr, and Robert Vozenilek. “A New Way to Design Software for Industrial Automation: 3D Printer Cement Mixtures”. MM Science Journal 2021, no. 1 (2021): 4223–29. https://doi.org/10.17973/mmsj.2021_03_2020063.