Skip to content

#soil

Keywords by Co - Occurrence

  1. Kumar Sandeep, Dixit Anjaneya (2026-04)
    3D-Printable Concrete Using Stabilized Soil:
    Effect of Binders and Curing Regimes on the Engineering Performance
  2. Yousaf Arslan, Koç Muammer (2026-03)
    Bio-Inspired 4D Printing of Earthen Soil Composites for Structural Living Wall Applications
  3. Ashok Tanshette Akash, Faisal Zoheb, Huang Jianxin, Puppala Anand (2026-03)
    Durability Evaluation of Soil-Geopolymer Based Composites for 3D Printing Applications in Geotechnical Engineering
  4. Shen Jianyu, Cheng Yaofei, Xiao Jianzhuang, Wang Bo et al. (2026-01)
    Thermal and Mechanical Performance of 3D-Printed Excavated Soil Wall Solidified by Alkali-Activated Slag
  5. Li Liqing, Shi Zhenkun, Wang Lei, Sui Yi et al. (2025-12)
    3D Printing of Simulated Lunar Soil Geopolymer and Analysis of Its Weak Surface and Anisotropic Performance
  6. Feng Xiaowei, Carvelli Valter, Pan Dongjiang, Zhu Chuankai et al. (2025-12)
    Additive Manufacturing of Hybrid Straw-Soil-Cement Materials for Enhanced Mine Models
  7. Matos Ana, Emiroğlu Mehmet, Milheiro-Oliveira Paula (2025-09)
    Predicting Stabilized Soil Mixture Proportions for 3D Printing:
    Preliminary Study Using the Design of Experiments Approach
  8. Yousaf Arslan, Rashid Ans, Koç Muammer (2025-09)
    Additive Manufacturing for Vernacular Architecture Using Local Earthen Soil and Bio-Waste Materials
  9. Lyu Libo, Li Weihong, Deng Yongjie, Yu Qiuchun et al. (2025-08)
    Engineering Properties of Magnesium Phosphate Cement Lunar Soil Concrete Under Vacuum Conditions and Its 3D Printing Application for Lunar Dome Model
  10. Yousaf Arslan, Khan Shoukat, Koç Muammer (2025-07)
    Material, Process, and Design Optimization of Local Earthen Soil Reinforced with Natural Fiber Waste and Nanoclay for 3DP of Functional Structures
  11. Kumar Sandeep, Kumar Abhishek, Pundir Aakanksha, Dwivedi Ashutosh et al. (2025-06)
    Low-Clay Soil as Fine Aggregate in 3D Printed Concrete:
    Insights into Fresh and Hardened Properties
  12. Li Shunuo, Xu Haoyi, Xia Xinyue, Fan Haojie et al. (2025-03)
    Bio-Envelop:
    Robotic 3D Printed Facade Using Cow Dung and Laterite Soil
  13. Li Liqing, Shi Zhenkun, Wang Lei, Sui Yi et al. (2025-03)
    Experimental Study on Rheological Properties and 3D Printing of Simulated Lunar Soil Polymers
  14. Nathansohn Nof, Gillis Elisheva, Linker Gitit, Zermati Noa et al. (2024-11)
    To Grow a Building:
    Soil and Seeds 3D Printing
  15. Gonzales Betty, Zavaleta Diana, Bertolotti Bruno, Aguilar Rafael et al. (2024-07)
    Comprehensive Investigation into the Influence of Soil Composition and Water Content on Cracking Due to Drying Shrinkage in 3D Printed Earthen Structures
  16. Zhou Zhijie, Geng Jian, Jin Chen, Liu Genjin et al. (2024-06)
    Influence of Residue Soil on the Properties of Fly-Ash-Slag-Based Geopolymer Materials for 3D Printing
  17. Soda Prabhath, Dwivedi Ashutosh, Sahana C., Gupta Souradeep (2024-03)
    Development of 3D Printable Stabilized Earth-Based Construction Materials Using Excavated Soil:
    Evaluation of Fresh and Hardened Properties
  18. Asaf Ofer, Bentur Arnon, Larianovsky Pavel, Sprecher Aaron (2023-10)
    From Soil to Printed Structures:
    A Systematic Approach to Designing Clay-Based Materials for 3D Printing in Construction and Architecture
  19. Lyu Qifeng, Dai Pengfei, Zong Meirong, Zhu Pinghua et al. (2023-10)
    Plant-Germination Ability and Mechanical Strength of 3D Printed Vegetation Concrete Bound with Cement and Soil
  20. Silva Guido, Burgos Valeria, Ñañez Robert, Kim Suyeon et al. (2023-07)
    Soil-Cement Matrices for Additive Construction:
    3D Printing System Validation and Printing Tests
  21. Daher Jana, Kleib Joelle, Benzerzour Mahfoud, Abriak Nor-Edine et al. (2023-06)
    The Development of Soil-Based 3D Printable Mixtures:
    A Mix-Design Methodology and a Case Study
  22. Sahoo Pitabash, Gupta Souradeep (2023-06)
    3D Printable Earth-Based Alkali-Activated Materials:
    Role of Mix-Design and Clay-Rich Soil
  23. Bajpayee Aayushi, Farahbakhsh Mehdi, Zakira Umme, Pandey Aditi et al. (2023-03)
    In-Situ Resource Utilization and Reconfiguration of Soils into Construction Materials for the Additive Manufacturing of Buildings
  24. Fratello Virginia, Rael Ronald (2020-05)
    Innovating Materials for Large-Scale Additive Manufacturing:
    Salt, Soil, Cement and Chardonnay
  25. Cesaretti Giovanni, Dini Enrico, Kestelier Xavier, Colla Valentina et al. (2013-08)
    Building Components for an Outpost on the Lunar Soil by Means of a Novel 3D Printing Technology