Review on the Developments of Structure, Construction Automation, and Monitoring of Intelligent Construction (2022-11)¶
Liu Kewei, Meng Qingfei, ,
Journal Article - Buildings, Vol. 12, Iss. 11
Abstract
The building and construction industry is a traditional industry that features high-capacity investment, long return period, high environment impact, and low technology demand in thepast decades. With the fast development of technology and the demand for environmental sustainability, it is inevitable for the building and construction industry to embrace the revolution of technology. Intelligent construction is developed in light of advanced technologies including advancedcomputing technology, 3D design and manufacturing, automation and control, sensing, unmannedaircraft, and autonomous intelligence. It is also closely integrated with using perceived, analytical, decision-making coordination for building construction with perceived intelligent execution technology in the processes. Currently, there is no consensus definition on “intelligent construction” despite its rapid development. This paper reviews existing and current development in intelligent construction focusing on the following three aspects: (a) new structural forms, which are innovativeand with potential or are being applied to automated and mass manufacturing/construction; (b) automated and intelligent construction system; and © advanced structure sensing and monitoringtechnology. These three components do not compromise the entire aspects for intelligent construction, but they have no doubt are the core elements for intelligent construction towards future building systems.
¶
20 References
- Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
Large-Scale 3D Printing of Ultra-High-Performance Concrete:
A New Processing Route for Architects and Builders - Hack Norman, Lauer Willi (2014-04)
Mesh Mould:
Robotically Fabricated Spatial Meshes as Reinforced Concrete Formwork - Hambach Manuel, Rutzen Matthias, Volkmer Dirk (2019-02)
Properties of 3D-Printed Fiber-Reinforced Portland Cement-Paste - Helm Volker, Jenny Ercan, Gramazio Fabio, Kohler Matthias (2012-10)
Mobile Robotic Fabrication on Construction Sites:
DimRob - Kazemian Ali, Yuan Xiao, Cochran Evan, Khoshnevis Behrokh (2017-04)
Cementitious Materials for Construction-Scale 3D Printing:
Laboratory Testing of Fresh Printing Mixture - Khoshnevis Behrokh (2003-11)
Automated Construction by Contour Crafting:
Related Robotics and Information Technologies - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Hardened Properties of High-Performance Printing Concrete - Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
Developments in Construction-Scale Additive Manufacturing Processes - Lin Jia, Wu Xiong, Yang Wen, Zhao Ri et al. (2018-02)
The Influence of Fine Aggregates on the 3D Printing Performance - Ngo Tuan, Kashani Alireza, Imbalzano Gabriele, Nguyen Quynh et al. (2018-02)
Additive Manufacturing (3D Printing):
A Review of Materials, Methods, Applications and Challenges - Panda Biranchi, Paul Suvash, Mohamed Nisar, Tay Yi et al. (2017-09)
Measurement of Tensile Bond Strength of 3D Printed Geopolymer Mortar - Perrot Arnaud, Rangeard Damien, Pierre Alexandre (2015-02)
Structural Build-Up of Cement-Based Materials Used for 3D Printing-Extrusion-Techniques - Schutter Geert, Lesage Karel, Mechtcherine Viktor, Nerella Venkatesh et al. (2018-08)
Vision of 3D Printing with Concrete:
Technical, Economic and Environmental Potentials - Soltan Daniel, Li Victor (2018-03)
A Self-Reinforced Cementitious Composite for Building-Scale 3D Printing - Subrin Kévin, Bressac Thomas, Garnier Sébastien, Ambiehl Alexandre et al. (2018-09)
Improvement of the Mobile Robot Location Dedicated for Habitable House Construction by 3D Printing - Tay Yi, Panda Biranchi, Paul Suvash, Mohamed Nisar et al. (2017-05)
3D Printing Trends in Building and Construction Industry:
A Review - Werkheiser Niki, Edmunson Jennifer, Fiske Michael, Khoshnevis Behrokh (2015-09)
On the Development of Additive Construction Technologies for Application to Development of Lunar/Martian Surface Structures Using In-Situ Materials - Xu Jie, Ding Lieyun, Love Peter (2017-01)
Digital Reproduction of Historical Building Ornamental Components:
From 3D Scanning to 3D Printing - Zareiyan Babak, Khoshnevis Behrokh (2017-06)
Inter-Layer Adhesion and Strength of Structures in Contour Crafting:
Effects of Aggregate-Size, Extrusion-Rate, and Layer-Thickness - Zhang Jingchuan, Wang Jialiang, Dong Sufen, Yu Xun et al. (2019-07)
A Review of the Current Progress and Application of 3D Printed Concrete
2 Citations
- Liu Bing, Guo Yazhao, Wang Yang, Liu Qizhou et al. (2024-11)
Study on the Compression Performance of 3D Printing Concrete Permanent Formwork Composite Columns - Wang Jun, Liu Zhenhua, Hou Jia, Ge Mengmeng (2024-04)
Research-Progress and Trend-Analysis of Concrete 3D Printing Technology Based on CiteSpace
BibTeX
@article{liu_meng_kong_zhan.2022.RotDoSCAaMoIC,
author = "Kewei Liu and Qingfei Meng and Qingzhao Kong and Xihong Zhang",
title = "Review on the Developments of Structure, Construction Automation, and Monitoring of Intelligent Construction",
doi = "10.3390/buildings12111890",
year = "2022",
journal = "Buildings",
volume = "12",
number = "11",
}
Formatted Citation
K. Liu, Q. Meng, Q. Kong and X. Zhang, “Review on the Developments of Structure, Construction Automation, and Monitoring of Intelligent Construction”, Buildings, vol. 12, no. 11, 2022, doi: 10.3390/buildings12111890.
Liu, Kewei, Qingfei Meng, Qingzhao Kong, and Xihong Zhang. “Review on the Developments of Structure, Construction Automation, and Monitoring of Intelligent Construction”. Buildings 12, no. 11 (2022). https://doi.org/10.3390/buildings12111890.