Combined Effect of Recycled Tire Steel Fiber and Blast Furnace Slag on the Mechanical Performance of 3D Printable Concrete (2025-12)¶

This study investigated the effects of waste steel fiber and high-volume blast furnace slag (BFS) substitution on the mechanical and physical properties of three-dimensional printable concrete (3DPC) to improve its environmental performance. BFS was substituted for cement at 0%, 25%, 50%, and 75% by volume. Waste steel fibers were added to the mixtures at three lengths (5, 10, and 15 mm) and two volumetric ratios (0.5% and 1.0%). Twenty-eight mixtures were optimized based on extrudability, buildability, and shape stability criteria. Parameters such as compressive and flexural strength, surface moisture content, and drying shrinkage were evaluated. The results showed that using up to 0.5% waste steel fibers increased compressive strength by up to 23%, but decreased it to a level of 1%. Fiber reinforcement improved the flexural strength of all blends by up to 53% at both ages, regardless of fiber ratio or length. Increasing the BFS substitution rate generally increased surface moisture however, this value decreased in mixtures containing 75% BFS and silica fume. Furthermore, using steel fibers and in-creasing fiber length significantly improved the drying shrinkage performance of the mixtures.