Concrete AM (2022-07)¶
, , ,
Contribution - Structures and Architecture, pp. 245-253
Abstract
Following applications in other industrial sectors, the integration ofAdditive Manufacturing (AM) technologies in the production of architectural components has revealed a great potential to respond to the need ofcustomisation and optimisation that the evolution ofdigital processes in architectural design has highlighted. This study establishes the foundations of a research on the application ofcementitious based materials according to Material Extrusion techniques. The knowledge gathered from the investigations of the Advanced Ceramics Laboratory (ACL), as well as parallels to other exploratory projects in 3D Printing on Concrete, supports an insight on the main control parameters inherent to these processes, allowing through experimentation to list a set ofperceived issues, particularly regarding the relationship between the material and the machine. In the absence of functional concrete extrusion equipment, the paper also describes the development of a custom laboratory-scale extrusion system that was used in the experimental tests.
¶
10 References
- Craveiro Flávio, Duarte José, Bártolo Helena, Bartolo Paulo (2019-04)
Additive Manufacturing as an Enabling Technology for Digital Construction:
A Perspective on Construction 4.0 - Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
Large-Scale 3D Printing of Ultra-High-Performance Concrete:
A New Processing Route for Architects and Builders - Hack Norman, Kloft Harald (2020-07)
Shotcrete 3D Printing Technology for the Fabrication of Slender Fully Reinforced Freeform Concrete Elements with High Surface Quality:
A Real-Scale Demonstrator - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Mix-Design and Fresh Properties for High-Performance Printing Concrete - Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
Developments in Construction-Scale Additive Manufacturing Processes - Ma Guowei, Wang Li (2017-08)
A Critical Review of Preparation Design and Workability Measurement of Concrete Material for Large-Scale 3D Printing - Pegna Joseph (1997-02)
Exploratory Investigation of Solid Freeform Construction - Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2022-02)
Extrusion-Process-Simulation and Layer-Shape-Prediction During 3D Concrete Printing Using the Particle-Finite-Element-Method - Wangler Timothy, Lloret-Fritschi Ena, Reiter Lex, Hack Norman et al. (2016-10)
Digital Concrete:
Opportunities and Challenges - Zahabizadeh Behzad, Cunha Vítor, Pereira João, Gonçalves Claúdia (2019-03)
Development of Cement-Based Mortars for 3D Printing Through Wet Extrusion
BibTeX
@inproceedings{ribe_figu_cruz_camo.2022.CA,
author = "João Ribeiro and Bruno Figueiredo and Paulo Jorge Sousa Cruz and Aires Camões",
title = "Concrete AM: An Insight into the Control of Main Parameters",
doi = "10.1201/9781003023555-30",
year = "2022",
pages = "245--253",
booktitle = "Structures and Architecture: A Viable Urban Perspective?",
editor = "Paulo Jorge Sousa Cruz and Marie Frier Hvejsel",
}
Formatted Citation
J. Ribeiro, B. Figueiredo, P. J. S. Cruz and A. Camões, “Concrete AM: An Insight into the Control of Main Parameters”, in Structures and Architecture: A Viable Urban Perspective?, 2022, pp. 245–253. doi: 10.1201/9781003023555-30.
Ribeiro, João, Bruno Figueiredo, Paulo Jorge Sousa Cruz, and Aires Camões. “Concrete AM: An Insight into the Control of Main Parameters”. In Structures and Architecture: A Viable Urban Perspective?, edited by Paulo Jorge Sousa Cruz and Marie Frier Hvejsel, 245–53, 2022. https://doi.org/10.1201/9781003023555-30.