Skip to content

3D Printing Cement-Based Materials Using 100% of Recycled Aggregates (2023-06)

10.1007/978-3-031-32519-9_63

 Obermeier Nico,  Wiese Felix,  Kustermann Andrea,  Stengel Thorsten
Contribution - Proceedings of the fib Symposium 2023, pp. 648-657

Abstract

After a couple ofyears ofintensive research and the first realized houses all over the world, 3D printing becomes a more and more important construction technique. However, 3D printing cement-based materials up to now are often based on a huge amount of binder materials and high-quality fine sands. Indeed, most of the realized projects are made of fine-grained mortars. As raw materials and especially high-quality sands are getting less available, it is aim of a research project to use recycled aggregates for 3D printing materials. The present paper gives an overview of fresh and hardened properties using 100% of recycled sand for a 3D printing mortar. The fresh mortar was characterized by a slump, filter press and a penetration test. The paper also summarizes the properties of hardened mortar, i.e., compressive and bending strength.

2 References

  1. Douba AlaEddin, Chan Clare, Berrios Stephanie, Kawashima Shiho (2020-07)
    Synthesis of Hybridized Rheological Modifiers for 3D Concrete Printing
  2. Sikora Paweł, Chougan Mehdi, Cuevas Villalobos Karla, Liebscher Marco et al. (2021-02)
    The Effects of Nano- and Micro-Sized Additives on 3D Printable Cementitious and Alkali-Activated Composites:
    A Review

1 Citations

  1. Maroszek Marcin, Rudziewicz Magdalena, Hebda Marek (2025-09)
    Recycled Components in 3D Concrete Printing Mixes:
    A Review

BibTeX 
@inproceedings{ober_wies_kust_sten.2023.3PCBMU1oRA,
  author            = "Nico Obermeier and Felix Wiese and Andrea Kustermann and Thorsten Stengel",
  title             = "3D Printing Cement-Based Materials Using 100% of Recycled Aggregates",
  doi               = "10.1007/978-3-031-32519-9_63",
  year              = "2023",
  volume            = "349",
  pages             = "648--657",
  booktitle         = "Proceedings of the fib Symposium 2023: Building for the Future Durable, Sustainable, Resilient",
  editor            = "Alper Ilki and Derya Çavunt and Yavuz Selim Çavunt",
}
Formatted Citation

N. Obermeier, F. Wiese, A. Kustermann and T. Stengel, “3D Printing Cement-Based Materials Using 100% of Recycled Aggregates”, in Proceedings of the fib Symposium 2023: Building for the Future Durable, Sustainable, Resilient, 2023, vol. 349, pp. 648–657. doi: 10.1007/978-3-031-32519-9_63.

Obermeier, Nico, Felix Wiese, Andrea Kustermann, and Thorsten Stengel. “3D Printing Cement-Based Materials Using 100% of Recycled Aggregates”. In Proceedings of the Fib Symposium 2023: Building for the Future Durable, Sustainable, Resilient, edited by Alper Ilki, Derya Çavunt, and Yavuz Selim Çavunt, 349:648–57, 2023. https://doi.org/10.1007/978-3-031-32519-9_63.