Skip to content

Experimental Study on Layer Bonding Property of 3D Printing Building Materials (2019-05)

10.1088/1755-1315/267/2/022005

Jie G., Jie B., Hongxue J.
Journal Article - IOP Conference Series: Earth and Environmental Science, Vol. 267, Iss. 2

Abstract

Bonding properties between 3D printing building materials layers are tested, including tensile strength test, shear strength and bending strength test of 3D printing building materials. The failure process and failure modes of 3D printing building materials are focused on analysis in this paper. Experimental results indicate that there are weak adhesive layers in the 3D printing building materials, specimen failure occurs in the weak adhesive layer. The tensile strength average value of 3D printing building materials is 0.74N/mm². The shear failure of 3D printing specimen is not occurred, but bending failure. The bending strength average value of 3D printing building materials is 0.88N/mm².

2 References

  1. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
    Hardened Properties of High-Performance Printing Concrete
  2. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
    Mix-Design and Fresh Properties for High-Performance Printing Concrete

1 Citations

  1. Mahadevan Meera, Francis Ann, Thomas Albert (2020-08)
    A Simulation-Based Investigation of Sustainability Aspects of 3D Printed Structures

BibTeX 
@article{jie_jie_hong.2019.ESoLBPo3PBM,
  author            = "G. Jie and B. Jie and J. Hongxue",
  title             = "Experimental Study on Layer Bonding Property of 3D Printing Building Materials",
  doi               = "10.1088/1755-1315/267/2/022005",
  year              = "2019",
  journal           = "IOP Conference Series: Earth and Environmental Science",
  volume            = "267",
  number            = "2",
}
Formatted Citation

G. Jie, B. Jie and J. Hongxue, “Experimental Study on Layer Bonding Property of 3D Printing Building Materials”, IOP Conference Series: Earth and Environmental Science, vol. 267, no. 2, 2019, doi: 10.1088/1755-1315/267/2/022005.

Jie, G., B. Jie, and J. Hongxue. “Experimental Study on Layer Bonding Property of 3D Printing Building Materials”. IOP Conference Series: Earth and Environmental Science 267, no. 2 (2019). https://doi.org/10.1088/1755-1315/267/2/022005.