Skip to content

Cementitious Cellular Composites with Auxetic Behavior (2020-04)

10.1016/j.cemconcomp.2020.103624

 Xu Yading,  Zhang Hongzhi,  Schlangen Erik, Luković Mladena,  Šavija Branko
Journal Article - Cement and Concrete Composites, Vol. 111

Abstract

Auxetic behavior refers to material with negative Poisson’s ratio. In this research, a new type of cementitious auxetic material is developed. A novel crack bridging auxetic mechanism is discovered which is in contrast with a local buckling mechanism commonly employed to trigger auxetic behavior. Taking advantage of 3D printing techniques, cementitious cellular composite (CCC) specimens with auxetic cellular structures were produced. Meanwhile, cementitious materials with different fiber content were used as constituent material. Uniaxial compression and cyclic loading tests were performed on the CCCs. Experiments show that with proper constituent material, CCCs can exhibit auxetic behavior which is induced by crack bridging process of the cementitious constituent material. In addition, strain hardening behavior can be identified in the stress-strain curve under uniaxial compression and consequently high specific energy absorption is obtained. Furthermore, 2.5% of reversible deformation which is significantly higher than conventional cementitious materials under cyclic loading is obtained within 25,000 cycles. Obvious fatigue damage is observed in the first 3000 cycles, afterwards signs of mechanical properties recovering can be found. The discovered auxetic mechanism indicates a new designing direction for brittle materials to achieve auxetic behaviors.

2 References

  1. Moini Mohamadreza, Olek Jan, Youngblood Jeffrey, Magee Bryan et al. (2018-08)
    Additive Manufacturing and Performance of Architectured Cement-Based Materials
  2. Xu Yading, Šavija Branko (2019-06)
    Development of Strain-Hardening Cementitious Composite (SHCC) Reinforced with 3D Printed Polymeric Reinforcement:
    Mechanical Properties

14 Citations

  1. Edmund Dineth, Zahra Tatheer, Asad Mohammad, Thamboo Julian (2024-09)
    Experimental Investigation on Tensile-Characteristics of 3D Printed Auxetic-Embedded Cementitious Composites and Shear-Bonding Behavior to Masonry
  2. Moini Mohamadreza, Rodriguez Fabian, Olek Jan, Youngblood Jeffrey et al. (2024-07)
    Mechanical Properties and Fracture Phenomena in 3D Printed Helical Cementitious Architected Materials Under Compression
  3. Chen Meng, Fang Shuai, Wang Guangquan, Xuan Yiwei et al. (2024-03)
    Compressive and Flexural Behavior of Engineered Cementitious Composites-Based Auxetic Structures:
    An Experimental and Numerical Study
  4. Moini Mohamadreza (2024-01)
    Perspectives in Architected Infrastructure Materials
  5. Imagawa Koichi, Ohno Motohiro, Ishida Tetsuya (2023-11)
    An Experimental Study on Energy-Absorption-Capability of Cast and 3D Printed Architected Cement-Based Materials
  6. Xu Yading, Šavija Branko (2023-08)
    3D Auxetic Cementitious-Polymeric Composite Structure with Compressive Strain-Hardening Behavior
  7. Gupta Shashank, Esmaeeli Hadi, Prihar Arjun, Ghantous Rita et al. (2023-04)
    Fracture- and Transport-Analysis of Heterogeneous 3D Printed Lamellar Cementitious Materials
  8. Kruger Jacques, Westhuizen Jean-Pierré (2023-03)
    Investigating the Poisson Ratio of 3D Printed Concrete
  9. Nguyen Vuong, Li Shuai, Liu Junli, Nguyen Kien et al. (2022-11)
    Modelling of 3D Concrete Printing Process:
    A Perspective on Material and Structural Simulations
  10. Nishijo Keisuke, Ohno Motohiro, Ishida Tetsuya (2022-06)
    Development of Cementitious Metamaterial with Compressive Strain-Hardening Characteristics
  11. Wu Zixia, Xu Yading, Šavija Branko (2021-12)
    Mechanical Properties of Lightweight Cementitious Cellular Composites Incorporating Micro-Encapsulated Phase-Change-Material
  12. Nguyen Vuong, Choudhry Niranjan, Panda Biranchi, Nguyen-Xuan Hung et al. (2021-12)
    Performance of Concrete Beam Reinforced with 3D Printed Bio-Inspired Primitive Scaffold Subjected to Three-Point Bending
  13. Šavija Branko (2020-09)
    Use of 3D Printing to Create Multi-Functional Cementitious Composites:
    Review, Challenges and Opportunities
  14. Xu Yading, Schlangen Erik, Šavija Branko (2020-07)
    Auxetic Behavior of Cementitious Cellular Composites under Uniaxial Compression and Cyclic Loading

BibTeX
@article{xu_zhan_schl_luko.2020.CCCwAB,
  author            = "Yading Xu and Hongzhi Zhang and Erik Schlangen and Mladena Luković and Branko Šavija",
  title             = "Cementitious Cellular Composites with Auxetic Behavior",
  doi               = "10.1016/j.cemconcomp.2020.103624",
  year              = "2020",
  journal           = "Cement and Concrete Composites",
  volume            = "111",
}
Formatted Citation

Y. Xu, H. Zhang, E. Schlangen, M. Luković and B. Šavija, “Cementitious Cellular Composites with Auxetic Behavior”, Cement and Concrete Composites, vol. 111, 2020, doi: 10.1016/j.cemconcomp.2020.103624.

Xu, Yading, Hongzhi Zhang, Erik Schlangen, Mladena Luković, and Branko Šavija. “Cementitious Cellular Composites with Auxetic Behavior”. Cement and Concrete Composites 111 (2020). https://doi.org/10.1016/j.cemconcomp.2020.103624.