Skip to content

Production Planning of Free-Form Concrete Panels Using 3D Plastering Technology (2020-10)

10.11159/icsect20.133

Son Seunghyun, Oh Jinhyuk, Park Kwangheon, Kim Sunkuk
Contribution - Proceedings of the 5th World Congress on Civil, Structural, and Environmental Engineering

Abstract

A technology has been developed to produce low-cost high-quality FCP (free-form concrete panel) using materials such as glass and pulp. However, FCP production and installation should meet required schedules in order for such technological development to be applied in practice. If it is not possible for the production to satisfy the installation schedules, sufficient lead time should be granted; otherwise, an additional 3D plastering machine is required. This then would give rise to cost and time conflicts. Therefore, an analysis on processes and influential factors relating to FCP production-installation is necessary after which algorithms should be created to link these processes and factors in a systematic method. This study is aimed at production planning of free-form concrete panels using 3D plastering technology. For the purpose of this study, an influential factor analysis and production planning shall be performed in a phased approach. The results of this study are expected to be used as a crucial reference in developing models that can simulate FCP productioninstallation in various ways.

1 References

  1. Son Seunghyun, Lim Jeeyoung, Kim Sunkuk (2018-03)
    Planning Algorithms for In-Situ Production of Free-Form Concrete Panels

0 Citations

BibTeX 
@inproceedings{son_oh_park_kim.2020.PPoFFCPU3PT,
  author            = "Seunghyun Son and Jinhyuk Oh and Kwangheon Park and Sunkuk Kim",
  title             = "Production Planning of Free-Form Concrete Panels Using 3D Plastering Technology",
  doi               = "10.11159/icsect20.133",
  year              = "2020",
  booktitle         = "Proceedings of the 5th World Congress on Civil, Structural, and Environmental Engineering",
}
Formatted Citation

S. Son, J. Oh, K. Park and S. Kim, “Production Planning of Free-Form Concrete Panels Using 3D Plastering Technology”, 2020. doi: 10.11159/icsect20.133.

Son, Seunghyun, Jinhyuk Oh, Kwangheon Park, and Sunkuk Kim. “Production Planning of Free-Form Concrete Panels Using 3D Plastering Technology”. In Proceedings of the 5th World Congress on Civil, Structural, and Environmental Engineering, 2020. https://doi.org/10.11159/icsect20.133.