Skip to content

Integration of Laser Profiler Feedback into FIM for Additive Manufacturing in Construction (2024-06)

10.22260/isarc2024/0013

Espinosa Simon,  Slepicka Martin,  Borrmann André
Contribution - Proceedings of the 41st International Symposium on Automation and Robotics in Construction

Abstract

This research delves into the utilization of laser profiling technology within the realm of Three-Dimensional (3D) printing in the construction industry. The primary emphasis is on achieving a seamless integration of Fabrication Inforg g mation Modeling (FIM), Additive Manufacturing (AM), and Digital Twinning (DT). The study involves the capture of precise measurements at various stages and storing them as Point Cloud (PC) data. Moreover, the objective is to transform operational planning and enhance real-time “as-built” data generation by intricately mapping shape and height deviations and storing the corresponding data in the FIM model.

2 References

  1. Slepicka Martin, Helou Jalal, Borrmann André (2023-07)
    Real-Time Data Exchange Robot-Control Integration for Fabrication Information Modeling
  2. Slepicka Martin, Vilgertshofer Simon, Borrmann André (2022-07)
    Fabrication Information Modeling:
    Interfacing Building Information Modeling with Digital Fabrication

1 Citations

  1. Slepicka Martin, Borrmann André (2024-09)
    Fabrication Information Modeling for Closed-Loop Design and Quality Improvement in Additive Manufacturing for Construction

BibTeX 
@inproceedings{espi_slep_borr.2024.IoLPFiFfAMiC,
  author            = "Simon Espinosa and Martin Slepicka and André Borrmann",
  title             = "Integration of Laser Profiler Feedback into FIM for Additive Manufacturing in Construction",
  doi               = "10.22260/isarc2024/0013",
  year              = "2024",
  booktitle         = "Proceedings of the 41st International Symposium on Automation and Robotics in Construction",
  editor            = "Vincente Gonzalez-Moret and Jiansong Zhang and Borja García de Soto and Ioannis Brilakis",
}
Formatted Citation

S. Espinosa, M. Slepicka and A. Borrmann, “Integration of Laser Profiler Feedback into FIM for Additive Manufacturing in Construction”, in Proceedings of the 41st International Symposium on Automation and Robotics in Construction, 2024. doi: 10.22260/isarc2024/0013.

Espinosa, Simon, Martin Slepicka, and André Borrmann. “Integration of Laser Profiler Feedback into FIM for Additive Manufacturing in Construction”. In Proceedings of the 41st International Symposium on Automation and Robotics in Construction, edited by Vincente Gonzalez-Moret, Jiansong Zhang, Borja García de Soto, and Ioannis Brilakis, 2024. https://doi.org/10.22260/isarc2024/0013.